Skip to main content

Browse Catalogue Saved Jobs

Fabrication drawings in under 60 seconds.

Product

Catalogue
Pricing
Free Estimate

Resources

FAQ
Guides
Glossary
Case Studies
Changelog

Company

About
Contact

Legal

Privacy Policy
Terms of Service

© 2026 CAD60. Drawn, checked & dimensioned in under 60 seconds.

Products

Catalogue

49 parametric models across 6 categories: swing gates, sliding & telescopic gates, fencing, window screens, balustrades & railings, posts. Pick a model, enter your site dimensions, and download a complete A4 fabrication drawing pack — front elevation, side elevation, top view, isometric, and dimension lines, all computed from your numbers in under 60 seconds.

Every model is fully parametric. Frame tube sizes, opening widths, post heights, batten or slat patterns, and hinge offsets all rebuild the 3D solid from scratch using a sub-millimetre OCCT geometry kernel — nothing is stretched or scaled from a template.

49 products

Swing Gates

19 models

Battened Pedestrian Gate

Parametric pedestrian gate with a rectangular hollow-tube frame and vertical battens face-fixed to the front. Supports optional posts, optional lockbox, and raked ground.

gatepedestrianbattens+1

Configure Drawing

Slatted Pedestrian Gate

Parametric pedestrian gate with a rectangular hollow-tube frame and evenly-distributed slats. Supports vertical or horizontal slat orientation, optional posts, optional lockbox, optional frame radius, and raked ground.

gatepedestrianslats+1

Configure Drawing

Spear-Top Pedestrian Gate

Parametric pedestrian gate with vertical spears (25x25mm SHS shafts) topped with crimped pyramid or cast arrowhead tips. Heritage palisade aesthetic. Spears typically pass through the top rail and overhang it by ~100mm, decorative tip included.

gatepedestrianspear+3

Configure Drawing

Elliptical Spear-Top Pedestrian Gate

Pedestrian gate whose vertical spear tips trace a half-ellipse arc across the top — tallest in the middle (convex) or dished (concave) — on a straight top rail. Heritage arched-palisade aesthetic. Each spear is a different length; a dedicated Spear Heights page gives a foot-to-tip cut-list (how many spears at each length).

gatepedestrianspear+5

Configure Drawing

Standard Pedestrian Gate Frame

Attach your own infill, sheet, or leave open. Add your details to draw an accurate custom pedestrian gate frame in minutes - perfect for adding your own battens, panels, or custom cladding. All all the essential options, including frame profiles, mid rails, lockboxes, posts, and more.

gatepedestrianframe+2

Configure Drawing

Battened Pedestrian Gate with Side Panels

Parametric pedestrian gate with fixed side panels. Gate has a rectangular hollow-tube frame with vertical battens face-fixed to the front. Side panels are welded to gate posts with matching frame and infill. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.

gatepedestrianbattens+2

Configure Drawing

Slatted Pedestrian Gate with Side Panels

Parametric pedestrian gate with fixed side panels. Gate has a rectangular hollow-tube frame with evenly-distributed slats. Side panels are welded to gate posts with matching frame and infill. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.

gatepedestrianslats+2

Configure Drawing

Spear-Top Pedestrian Gate with Side Panels

Parametric palisade pedestrian gate with fixed side panels. Gate has a rectangular hollow-tube frame with a row of square or round spear shafts (typically 25x25x1.2 SHS) topped with crimped pyramid or cast arrowhead tips. Side panels are welded to gate posts with matching frame and spear infill so the run reads as a single palisade broken only by the gate posts. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.

gatepedestrianspear+4

Configure Drawing

Patterned Battened Pedestrian Gate

Pedestrian gate with a mixed-profile vertical batten pattern. Define 2 to 5 batten types (SHS, RHS, round bar, or solid square) and their per-type counts, spacings, and between-type gaps to produce a repeating decorative pattern across the gate face.

gatepedestrianbattens+2

Configure Drawing

Patterned Battened Pedestrian Gate with Side Panels

Pedestrian gate with fixed side panels. The gate carries a mixed-profile vertical batten pattern while the side panels use evenly spaced battens. Side panels are welded to gate posts with matching frames. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.

gatepedestrianbattens+3

Configure Drawing

Battened Double Swing Gate

Parametric double swing driveway gate with two leaves meeting in the centre. Each leaf has a rectangular hollow-tube frame with vertical battens face-fixed to the front. Supports optional posts, equal or custom leaf split, and optional mid-rail.

gatedouble-swingdriveway+2

Configure Drawing

Slatted Double Swing Gate

Parametric double swing driveway gate with two leaves meeting in the centre. Each leaf has a rectangular hollow-tube frame with evenly-distributed slats. Supports vertical or horizontal slat orientation, optional posts, equal or custom leaf split, optional mid-rail, and frame radius.

gatedouble-swingdriveway+2

Configure Drawing

Spear-Top Double Swing Gate

Parametric palisade double swing driveway gate with two leaves meeting in the centre. Each leaf has a rectangular hollow-tube frame with vertical spears (typically 25x25x1.2 SHS shafts) topped with crimped pyramid or cast arrowhead tips. Spears default to cut-into-bottom so the swept envelope clears the driveway. Supports optional posts, equal or custom leaf split, and optional mid-rail.

gatedouble-swingdriveway+4

Configure Drawing

Standard Double Swing Gate Frame

Parametric double swing driveway gate frame with two leaves meeting in the centre. Frame-only — no battens or slats. Attach your own infill, sheet, or leave open. Supports optional slant top, optional posts, equal or custom leaf split, and optional mid-rail.

gatedouble-swingdriveway+3

Configure Drawing

Slatted Single Swing Gate

One full-width swing leaf spanning the opening, with a hollow-tube frame and evenly-distributed slats. Run the slats vertical or horizontal. Carries the heavy double-swing frame (independent bottom rail, single rake for sloping ground, mid-rails with a diagonal brace) and pedestrian hardware: pick the hinge side, add a lockbox, a lever or ball handle lock, posts with footplates, and a catch plate.

gatesingle-swingswing+2

Configure Drawing

Battened Single Swing Gate

One full-width swing leaf spanning the opening, with a hollow-tube frame and vertical battens face-fixed to the front. Battens can overhang the top and bottom rails and take push-in end caps. Carries the heavy double-swing frame (independent bottom rail, single rake for sloping ground, mid-rails with a diagonal brace) and pedestrian hardware: pick the hinge side, add a lockbox with a welded lock surround plate, a lever or ball handle lock, posts with footplates, and a catch plate.

gatesingle-swingswing+2

Configure Drawing

Spear-Top Single Swing Gate

One full-width swing leaf spanning the opening, with a hollow-tube frame and a row of vertical spears topped with crimped pyramid or cast arrowhead tips. Heritage palisade look. Spears default to cut-into-bottom so the swept envelope clears the path. Carries the heavy double-swing frame (independent bottom rail, single rake for sloping ground, mid-rails with a diagonal brace) and pedestrian hardware: pick the hinge side, add a lockbox, a lever or ball handle lock, posts with footplates, and a catch plate.

gatesingle-swingswing+4

Configure Drawing

Standard Single Swing Gate Frame

One full-width swing leaf spanning the opening, frame only. No battens or slats, so attach your own infill, sheet, or leave it open. Optional slant top for an angled profile. Carries the heavy double-swing frame (independent bottom rail, single rake for sloping ground, mid-rails with a diagonal brace) and pedestrian hardware: pick the hinge side, add a lockbox, a lever or ball handle lock, posts with footplates, and a catch plate.

gatesingle-swingswing+3

Configure Drawing

Louvred Pedestrian Gate

Parametric pedestrian gate with a rectangular hollow-tube frame and evenly-distributed louvres (flat bar angled at 45 degrees). Supports horizontal or vertical louvre orientation, optional posts, optional lockbox, optional frame radius, and raked ground.

gatepedestrianlouvres+1

Configure Drawing

Sliding & Telescopic Gates

17 models

Battened Sliding Gate

Parametric sliding gate with a rectangular hollow-tube frame and vertical battens face-fixed to the front. Supports optional tail extension for motor automation and optional L-piece top rail.

gateslidingbattens+1

Configure Drawing

Slatted Sliding Gate

Parametric sliding gate with a rectangular hollow-tube frame and evenly-distributed slats. Supports vertical or horizontal slat orientation, optional tail extension for motor automation, and optional L-piece top rail.

gateslidingslats+1

Configure Drawing

Spear-Top Sliding Gate

Parametric sliding gate with vertical spears (25x25mm SHS shafts) topped with crimped pyramid or cast arrowhead tips. Heritage palisade aesthetic on a motorised sliding leaf. Supports rake, mid-rails, tail extension, and optional L-piece top rail. Spears default to cut-into-bottom so the swept envelope clears the wheels and track.

gateslidingspear+3

Configure Drawing

Elliptical Spear-Top Sliding Gate

Motorised sliding gate whose vertical spear tips trace a half-ellipse arc across the top — tallest in the middle (convex) or dished (concave) — on a straight (level or raked) top rail. Heritage arched-palisade aesthetic. Each spear is a different length; a dedicated Spear Heights page gives a foot-to-tip cut-list (how many spears at each length). Supports rake, mid-rails, tail.

gateslidingspear+5

Configure Drawing

Half-Height Slat Sliding Gate

Parametric sliding gate with a horizontal cross-rail dividing an empty top region from a vertical-slat lower region (“half-height” slat infill, open top). Supports an independently-raked bottom rail (different height at each stile), an optional vertical gate tail below the bottom rail for V-track hardware, and an optional L-piece top rail.

gateslidingslats+5

Configure Drawing

Two-Section Vertical Slat Sliding Gate

Parametric vertical-slat sliding gate with a horizontal cross-rail dividing two slatted sections. The lower section (between cross-rail and bottom rail) supports an independently-raked bottom rail; its slats taper to follow the rake. The upper section (between cross-rail and top rail) is always a true rectangle and is also filled with slats that align vertically with those of the lower section. Supports an optional gate tail, L-piece top rail, and the standard sliding-gate accessory toggles.

gateslidingslats+5

Configure Drawing

Dual-Pattern Two-Section Vertical Slat Sliding Gate

Parametric vertical-slat sliding gate with a horizontal cross-rail dividing two slatted sections that each carry their own independent slat options. The lower section (between cross-rail and bottom rail) supports an independently-raked bottom rail; its slats taper to follow the rake. The upper section (between cross-rail and top rail) is always a true rectangle. Each section sets its own slat profile, distribution, spacing/count, and edge offset, so the two patterns need not align (e.g. dense privacy slats below, wide airy slats above). Supports an optional gate tail, L-piece top rail, and the standard sliding-gate accessory toggles.

gateslidingslats+6

Configure Drawing

Hamptons-Style Sliding Gate

Hamptons-style parametric sliding gate with a horizontal cross-rail dividing a vertical-slat top region from a composite bottom region intended for U-channel cladding inserts (timber, hardies, or panel — fitted on site). Supports an independently-raked bottom rail (different height at each stile), an optional vertical gate tail below the bottom rail for V-track hardware, and an optional L-piece top rail.

gateslidingslats+6

Configure Drawing

Standard Sliding Gate Frame

Parametric sliding gate frame with a rectangular hollow-tube frame. Frame-only — no battens or slats. Attach your own infill, sheet, or leave open. Supports optional tail extension for motor automation, optional L-piece top rail, and independent left/right heights.

gateslidingframe+2

Configure Drawing

Patterned Battened Sliding Gate

Sliding gate with a mixed-profile vertical batten pattern. Define 2 to 5 batten types (SHS, RHS, round bar, or solid square) and their per-type counts, spacings, and between-type gaps to produce a repeating decorative pattern across the gate face.

gateslidingbattens+2

Configure Drawing

Louvred Oversized Sliding Gate

Parametric oversized sliding gate split into top and bottom sections for transport and powder coating. Features internal stiles creating bays, horizontal louvred battens (extrusion at 45 degrees), wheels, and optional tail. Top section connects to bottom via internal sleeves.

gateslidinglouvres+2

Configure Drawing

Louvred Sliding Gate

Parametric single-piece sliding gate with a rectangular hollow-tube frame, internal vertical stiles dividing the face into bays, and 45-degree louvred battens in each bay. Supports optional tail extension for motor automation, optional mid-rail brace, and optional L-piece top rail.

gateslidinglouvres+1

Configure Drawing

Standard Telescopic Gate Frame

Parametric 2- or 3-leaf telescopic sliding gate frame. Frame-only — attach your own battens, slats, louvres, sheet, or leave open. Leaves sit on parallel tracks and telescope past each other, parking in a fraction of the opening width — ideal for driveways with limited run-off space.

gateslidingtelescopic+3

Configure Drawing

Battened Telescopic Gate

2- or 3-leaf telescopic sliding gate with vertical battens face-fixed to each leaf. Leaves telescope past each other on parallel tracks, parking in a fraction of the opening width — ideal for driveways with limited run-off space.

gateslidingtelescopic+2

Configure Drawing

Slatted Telescopic Gate

2- or 3-leaf telescopic sliding gate with horizontal slats on each leaf. Leaves telescope past each other on parallel tracks, parking in a fraction of the opening width — ideal for driveways with limited run-off space.

gateslidingtelescopic+2

Configure Drawing

Louvred Telescopic Gate

2- or 3-leaf telescopic sliding gate with angled louvre blades on each leaf for privacy. Leaves telescope past each other on parallel tracks, parking in a fraction of the opening width — ideal for driveways with limited run-off space.

gateslidingtelescopic+2

Configure Drawing

Patterned Battened Telescopic Gate

2- or 3-leaf telescopic sliding gate with a mixed-profile decorative batten pattern on each leaf. Define 2 to 5 batten types (SHS, RHS, round bar, or solid square) to produce a repeating pattern. Leaves park in a fraction of the opening width — ideal for driveways with limited run-off space.

gateslidingtelescopic+3

Configure Drawing

Fencing

8 models

Battened Fence Panel

Standalone battened fence panel with optional posts on either end. A single rectangular frame with vertical battens face-fixed to the front. Suitable for fencing runs, privacy screens, or wall-mounted panels.

fence-panelfencingbattens+1

Configure Drawing

Slatted Fence Panel

Standalone slatted fence panel with optional posts on either end. A single rectangular frame with evenly-distributed slats (vertical or horizontal). Suitable for fencing runs, privacy screens, or wall-mounted panels.

fence-panelfencingslats+1

Configure Drawing

Louvred Fence Panel

Standalone louvred fence panel with optional posts on either end. A single rectangular frame filled with evenly-distributed louvres (flat bar or elliptical aluminium extrusions, angled at 45 degrees). Supports horizontal or vertical louvre orientation. Suitable for fencing runs, privacy screens, or wall-mounted panels.

fence-panelfencinglouvres+1

Configure Drawing

Patterned Battened Fence Panel

Standalone fence panel with a mixed-profile batten pattern. Define 2 to 10 batten types (SHS, RHS, round bar, solid square, or angle) and their per-type counts, spacings, and between-type gaps to produce a repeating decorative pattern. Pattern can run vertically or horizontally across the panel face. Optional posts on either end.

fence-panelfencingbattens+2

Configure Drawing

Spear-Top Fence Panel

Standalone palisade fence panel with optional posts on either end. A single rectangular frame with vertical spears (typically 25x25x1.2 SHS shafts) topped with crimped pyramid or cast arrowhead tips. Defaults to a long through-bottom spike below the rail for the classic palisade fence-line look. Suitable for security fencing runs, heritage boundary fences, and commercial perimeters.

fence-panelfencingspear+3

Configure Drawing

Battened Privacy Screen

Frameless vertical batten screen welded to flat-bar base plates. Designed for pool fencing, outdoor BBQ areas, and property boundary screening. Configurable batten spacing with optional top caps and horizontal bracing bar.

screenfencingbattens+1

Configure Drawing

Curved Battened Privacy Screen

Frameless vertical batten screen with a quarter-circle step-down curved top profile, welded to flat-bar base plates. Designed for pool fencing, outdoor BBQ areas, and property boundary screening. Configurable batten spacing with optional top caps and horizontal bracing bar.

screenfencingbattens+2

Configure Drawing

Pool Fence Panel

Vertical bar pool safety panel. Parameters constrained to AS 1926.1-2012 dimensional limits (>=1200 mm height, <=100 mm gaps). This is a fabrication drawing - installed-barrier compliance must be verified by a registered pool safety inspector in your jurisdiction.

pool-fencefencingbars+1

Configure Drawing

Window Screens

3 models

Window Screen Frame

Rigid rectangular window-screen frame mounted off a wall on standoff feet, with no infill. Two mitred-and-welded stiles and rails in RHS or SHS, with wall-mount legs whose length sets how far the screen stands off the window. The base frame for the slatted and battened window screens.

window-screenscreenframe+2

Configure Drawing

Slatted Window Screen

Window screen with slat infill set inside the frame opening, mounted off a wall on standoff feet. Slats run horizontal or vertical at a chosen spacing to block sightlines and sun while letting air through. Mitred-and-welded RHS/SHS frame.

window-screenscreenslats+2

Configure Drawing

Battened Window Screen

Window screen with battens face-fixed across the front of the frame, mounted off a wall on standoff feet. Battens run vertical or horizontal at a chosen spacing for a clean architectural screen. Mitred-and-welded RHS/SHS frame.

window-screenscreenbattens+2

Configure Drawing

Balustrades & Railings

1 model

Flat-Top Balustrade

Straight-run balustrade with posts at regular intervals, top and bottom rails, optional mid rail and handrail, and vertical bar, horizontal wire, or horizontal extrusion infill. Suited for decks, balconies, mezzanines, and level walkways.

balustraderailingbars+1

Configure Drawing

Posts

1 model

Posts

Fabrication drawing for up to 7 standalone post types. Each post has its own profile, height, mounting (footplate / concrete-in / bolted), footplate orientation, and quantity. Output is a single front-view sheet with each post drawn side by side: front elevation, footplate plan below it, and a quantity callout.

postfootplatebaseplate+2

Configure Drawing

Don't see your design?

Need a Different Design?

We can build custom models for your shop, so you change the dimensions and create new drawings in seconds.

custombespokeany product

Coming Soon

More Models Coming Soon...

We're working on new gate and fence designs. Have a suggestion? Let us know.

new modelsin progressstay tuned

Suggest a Model