CAD60 -- Parametric Fabrication Drawing Generator
CAD60 is a parametric fabrication drawing generator for metal fabricators. Pick one of 178 gate, fence, or balustrade models from the catalogue, enter your site dimensions, and download an A4 PDF drawing pack with orthographic views, dimension lines, and a cut list in under 60 seconds. Built for welders, metal fabricators, and small fab shops who need accurate drawings without CAD software.
Fabrication drawings
Type your sizes.
Get the drawing.
Pick what you are making. Type the site measurements. Make your drawings in 60 seconds.
- 178
- 60 s
- 2,200+
- $0
How it works
Three steps. 60 seconds.
You do not need CAD. You need a tape measure and the job in front of you.
Pick a model
There are 178 models in the catalogue. Pick the one that matches your job.
Type your sizes
Put in the opening width, the height and your extrusion sizes. Work in mm or inches.
Download the pack
You get a PDF with every view and a cutting list. Every dimension is measured off a 3D model.
Free to configure. No card.
Real drawings
These came straight out of CAD60.
Nobody touched them up. Click a sheet to bring it to the front.
Slatted Tracked Sliding Gate
Vertical aluminium slats on a tracked sliding frame. You get Front, Side, Top, Squareness, Posts, Hardware Details and Cutting List.
One job
Sketch. Drawing. Built.
Here is one job from start to finish.
The sketch
The customer drew what they wanted on a photo.
The drawing
The shop put the sizes into CAD60. Time taken: ~90 sec.
The job
Built by Sanctum Screens in Brisbane, QLD.
The sheet shown is the drawing for this job.
What shops say
What other shops say.
CAD60 has been a game changer for our business. It has helped us achieve faster customer approvals and significantly improve our overall job turnaround times. Being able to show customers a live 3D model of their product before it goes into production has saved us hours of back-and-forth communication.
The team is also extremely responsive and quick to complete any custom changes we require. We highly recommend CAD60.
Julie & Wayne
Top Screens
I can't believe how good this is looking. The ability to draw an accurate scale model so quickly is just wild.
Mark Tolley
Sanctum Screens
Saves me hours on every drawing. The idea to interface is so quick, a real game changer for our projects.
Ryan Emmett
Woodys
Custom models
Don't see what you make?
Sign up to Fabricator and we will build your model for free. Here is how it goes.
Send a sketch or a photo
A phone photo of the job is fine. So is a drawing on the back of a docket.
We build it
My dad and I turn it into a model you can change the sizes on.
It shows up in your catalogue
Pick it, type your sizes, and make your drawing in 60 seconds.
You choose
Public or private?
- Public
- We put it in the catalogue for everyone.
- Private
- We keep it private, so only your shop sees it.
We add new models every week.
Pricing
Same gate. Two ways to get it drawn.
Most shops lose 30 to 90 minutes drawing up every job. Or they pay a drafter and wait.
Have a look for free. Upgrade when the job is real.
You can set up any job without paying. Fabricator is for when you need to build it.
Explorer
$0
- All 178 gate, fence and screen models
- Your own dimensions, live 3D preview
- Watermarked drawing preview
- One complete example pack per model, clean PDF at fixed dimensions
Fabricator
2 months free- Clean PDF drawing packs for your own dimensions
- Don't see what you make? Sign up to Fabricator and we will build your model for free. Ask for your model
$81
Billed once a year at $970. That works out to $81 a month.
- SVG and STEP exports for CNC, laser and CAD
- Full cutting list, material schedule and cost estimate
- Your logo, client and job details on every sheet
- Save and reload every drawing
- Client 3D share links
- Priority support (4h response)
Secure checkout powered by Stripe. We never see or store your card details.
1 seat left at $97/mo until 31 October, then $129/mo.
The annual plan is charged once at $970. $81 a month is that charge spread over twelve months.
Questions shops ask me.
Can you draw what we make?
Most likely, yes. We have 178 models right now. Gates, fences, pool fences, screens and balustrades. We add new models every week.
Don't see what you make? Sign up to Fabricator and we will build your model for free.
We can put it in the catalogue. Or we can keep it private, so only your shop sees it. Send us a sketch or a photo and we will get started. Ask for your model.
Can I trust the drawing on the shop floor?
Yes. We build a full 3D model from your sizes. Every number on the sheet is measured off that model. Nothing is stretched from a template. My dad checks new models against real jobs in his shop.
I don't know CAD. Can I use it?
Yes. There is nothing to install. Pick what you are making. Type in your sizes. Hit generate. If you can measure an opening, you can use CAD60.
What do I get?
You get a PDF with every view and every size. You get a cutting list with weights and costs. You get SVG and STEP files for your own CAD or a laser cutter. You get a 3D link to send to your customer. Your logo goes on every sheet.
What if the customer changes the size?
Change the number and hit generate again. You make a new drawing in 60 seconds. It costs you nothing.
Do you do inches?
Yes. You can work in mm or inches. Pick one when you sign up. You can change it any time.
Who made this?
My dad and I made CAD60 together. He has run his own fabrication business for nearly 20 years, and I'm a programmer. Getting a good drawing fast and cheap was always a struggle for him. So we built CAD60 to fix that for other fabricators too.
Have a go. It's free.
Pick a model and type your sizes. Make your drawing in 60 seconds.