Parametric double swing driveway gate with two leaves meeting in the centre. Each leaf has a rectangular hollow-tube frame with evenly-distributed slats. Supports vertical or horizontal slat orientation, optional posts, equal or custom leaf split, optional mid-rail, and frame radius.
Configure Slatted Double Swing Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,500 mm to 8,000 mm |
| Clear Opening Height | 600 mm to 3,000 mm |
| Gap Below Gate | 10 mm to 300 mm |
| Leaf Split | Equal, Custom |
| Left Leaf Width | 500 mm to 6,000 mm |
| Frame Extrusion Profile | 40 x 40 SHS, 50 x 50 SHS, 25 x 25 SHS, Other |
| Frame Tube Width | 25 mm to 200 mm |
| Frame Tube Depth | 25 mm to 200 mm |
| Frame Gauge | 1.2 mm to 6 mm |
| LHS Tolerance | 5 mm to 50 mm |
| RHS Tolerance | 5 mm to 50 mm |
| Meeting Tolerance | 3 mm to 50 mm |
| Post Extrusion Size | 50 x 50 SHS, 65 x 65 SHS, 90 x 90 SHS, Other |
| Post Width | 30 mm to 200 mm |
| Post Depth | 30 mm to 200 mm |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Slat Size | 65 x 16 Extrusion, 25 x 25 SHS, Other |
| Slat Width | 10 mm to 200 mm |
| Slat Depth | 10 mm to 200 mm |
| Slat Distribution | Fixed Gap, Number of Slats |
| Slat Spacing | 3 mm to 200 mm |
| Slat Offset from Edge | 0 mm to 500 mm |
| Slat Orientation | Vertical, Horizontal |
The Slatted Double Swing Gate accepts opening widths from 1,500 mm to 8,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Heights range from 600 mm to 3,000 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Gates. Tags: gate, double-swing, driveway, slats, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.