Stepped Glass Pool Fence Panel | Fabrication Drawings
A frameless toughened-glass pool fence panel that crosses a one-block level change: the bottom edge is notched over the step with its own gap above the lower ground, the top of the block and the block face, and the top edge is the same height above each level, two heights of your own or level, with a raked section between. Held by stainless spigots on each level or a base channel on each level, with a glass template sheet for the cut shape.
Configure Stepped Glass Pool Fence Panel dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Panel Width | 100 mm to 100,000 mm |
| Glass Height Above Each Level | 100 mm to 20,000 mm |
| Glass Thickness | 1 mm to 1,000 mm |
| Glass Type | Toughened, Toughened Laminated |
| Gap Below Glass (Lower Level) | 0 mm to 5,000 mm |
| Corner Radius | 0 mm to 1,000 mm |
| Glass Tint | Clear, Frosted, Grey, Blue |
| Floor Steps Up To The | Right, Left |
| Step Face From Low End | 0 mm to 100,000 mm |
| Step Height | 1 mm to 10,000 mm |
| Gap Below Glass (Upper Level) | 0 mm to 5,000 mm |
| Gap To Step Face | 0 mm to 5,000 mm |
| Notch Corner Radius | 0 mm to 1,000 mm |
| Top Edge | Same height above each level, Two heights, raked between, Level top |
| Top Height (Low Side) | 1 mm to 100,000 mm |
| Top Height (High Side) | 1 mm to 100,000 mm |
| Top Height | 1 mm to 100,000 mm |
| Rake Starts At | 0 mm to 100,000 mm |
| Rake Ends At | 0 mm to 100,000 mm |
| Mounting System | Spigots, Base Channel |
| Spigots On The Lower Level | 1, 2, 3 |
| Lower Spigot Edge Inset | 0 mm to 50,000 mm |
| Spigot Fixing | Core Drilled, Base Plate |
| Spigot Diameter | 10 mm to 1,000 mm |
| Spigot Sizing | By glass grip, By overall length |
| Spigot Grip Height | 40 mm to 10,000 mm |
| Spigot Length | 40 mm to 20,000 mm |
| Spigot Plate Size | 0 mm to 5,000 mm |
| Spigot Plate Thickness | 1 mm to 1,000 mm |
| Spigot Plate Hole Ø | 2 mm to 1,000 mm |
| Spigot Plate Hole Edge Inset | 0 mm to 10,000 mm |
| Glass Embed | 0 mm to 500 mm |
| Post Attachment | Core Drilled, Bolted, Footplate |
| Footplate Width | 10 mm to 10,000 mm |
| Footplate Depth | 10 mm to 10,000 mm |
| Footplate Thickness | 1 mm to 1,000 mm |
| Footplate Hole Ø | 2 mm to 1,000 mm |
| Footplate Hole Edge Inset | 0 mm to 10,000 mm |
| Clamps per Post | 2 Clamps, 3 Clamps |
| Standoff Rows | 1 Row, 2 Rows, 3 Rows |
| Standoff Columns | 2 Columns, 3 Columns, 4 Columns, 5 Columns, 6 Columns |
| First Row Height | 0 mm to 100,000 mm |
| Row Pitch | 20 mm to 100,000 mm |
| Standoff Edge Inset | 0 mm to 50,000 mm |
| Standoff Diameter | 5 mm to 1,000 mm |
| Standoff Projection | 0 mm to 5,000 mm |
| Glass Below Floor Level | 0 mm to 20,000 mm |
| Hole Diameter | 1 mm to 1,000 mm |
| Cap Thickness | 0 mm to 1,000 mm |
| Slab Thickness | 10 mm to 20,000 mm |
| Spigots On The Upper Level | 1, 2, 3 |
| Upper Spigot Edge Inset | 0 mm to 50,000 mm |
| Material | Standard (aluminium channel, stainless posts and rail), Aluminium, Galvanised, Stainless 304, Stainless 316 |
| Finish | None (mill finish), Powder coat, Anodised, Hot-dip galvanised, Galvanised and powder coat, Satin polish, Mirror polish, Raw (unfinished) |
Frequently Asked Questions
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Stepped Glass Pool Fence Panel drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Stepped Glass Pool Fence Panel?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Fencing. Tags: pool-fence, glass, frameless, fencing, stepped. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
