About this model
Cantilever sliding gate with angled louvre blades. Internal stiles divide the gate body into equal bays of tilted louvres; the tail stays open frame. Level only. No track across the opening: roller carriages on posts beside the opening run inside a down-facing channel welded under the bottom rail, and a braced counterbalance tail, half the clear opening by default, extends past the gate body. The drawing starts as the gate alone. Switch on the add-ons you need: roller carriages at real size, roller posts, a catch post, a Posts View sheet, a Hardware Details sheet, a gear rack and a motor.
Type your site sizes and pick the options below. CAD60 rebuilds the Louvred Cantilever Sliding Gate as a 3D solid and redraws every sheet to match.
One of 181 parametric models in the catalogue, each drawn from a true 3D solid.
Front, side, top and isometric views on A4 PDF sheets, each with a title block.
Dimension lines measured off the 3D solid to under a millimetre, never scaled from a template.
The same solid for your CAD or CNC software, ready to nest or quote from.
Change a size and the whole pack regenerates. Millimetres or inches, switch at any time.