Patterned Battened Telescopic Sliding Gate | Fabrication Drawings
Telescopic sliding gate with 2 or 3 leaves and a mixed-profile batten pattern on each leaf. Define 2 to 10 batten types (SHS, RHS, round bar or solid square) to build a repeating pattern. The leaves run on parallel tracks and slide past each other, so the gate parks in a fraction of the opening width. It suits driveways with little run-back space. The pack dimensions the run-back and the stack depth. The drawing starts as the leaves on plain wheels: the tracks, posts, end stops, real-size hardware, a Posts View sheet and a Hardware Details sheet are add-ons you switch on.
Configure Patterned Battened Telescopic Sliding Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,000 mm to 30,000 mm |
| Number of Leaves | 2 Leaves, 3 Leaves |
| Leaf Overlap | 0 mm to 5,000 mm |
| Track Gap | 0 mm to 5,000 mm |
| Clear Height (Left) | 500 mm to 12,000 mm |
| Clear Height (Right) | 500 mm to 12,000 mm |
| Ground Clearance | 0 mm to 500 mm |
| Mid Rail Orientation | Horizontal, Vertical, Diagonal |
| Diagonal Direction | Bottom Left to Top Right, Top Left to Bottom Right |
| Number of Batten Types | 2 types, 3 types, 4 types, 5 types, 6 types, 7 types, 8 types, 9 types, 10 types |
| Type A Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type A Shape | RHS, Round bar, Solid square |
| Type A Width / Diameter | 6 mm to 200 mm |
| Type A Depth | 6 mm to 200 mm |
| Type A Gauge | 1 mm to 6 mm |
| Type A Spacing | 0 mm to 25,000 mm |
| Type B Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type B Shape | RHS, Round bar, Solid square |
| Type B Width / Diameter | 6 mm to 200 mm |
| Type B Depth | 6 mm to 200 mm |
| Type B Gauge | 1 mm to 6 mm |
| Type B Spacing | 0 mm to 25,000 mm |
| Type C Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type C Shape | RHS, Round bar, Solid square |
| Type C Width / Diameter | 6 mm to 200 mm |
| Type C Depth | 6 mm to 200 mm |
| Type C Gauge | 1 mm to 6 mm |
| Type C Spacing | 0 mm to 25,000 mm |
| Type D Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type D Shape | RHS, Round bar, Solid square |
| Type D Width / Diameter | 6 mm to 200 mm |
| Type D Depth | 6 mm to 200 mm |
| Type D Gauge | 1 mm to 6 mm |
| Type D Spacing | 0 mm to 25,000 mm |
| Type E Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type E Shape | RHS, Round bar, Solid square |
| Type E Width / Diameter | 6 mm to 200 mm |
| Type E Depth | 6 mm to 200 mm |
| Type E Gauge | 1 mm to 6 mm |
| Type E Spacing | 0 mm to 25,000 mm |
| Type F Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type F Shape | RHS, Round bar, Solid square |
| Type F Width / Diameter | 6 mm to 200 mm |
| Type F Depth | 6 mm to 200 mm |
| Type F Gauge | 1 mm to 6 mm |
| Type F Spacing | 0 mm to 25,000 mm |
| Type G Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type G Shape | RHS, Round bar, Solid square |
| Type G Width / Diameter | 6 mm to 200 mm |
| Type G Depth | 6 mm to 200 mm |
| Type G Gauge | 1 mm to 6 mm |
| Type G Spacing | 0 mm to 25,000 mm |
| Type H Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type H Shape | RHS, Round bar, Solid square |
| Type H Width / Diameter | 6 mm to 200 mm |
| Type H Depth | 6 mm to 200 mm |
| Type H Gauge | 1 mm to 6 mm |
| Type H Spacing | 0 mm to 25,000 mm |
| Type I Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type I Shape | RHS, Round bar, Solid square |
| Type I Width / Diameter | 6 mm to 200 mm |
| Type I Depth | 6 mm to 200 mm |
| Type I Gauge | 1 mm to 6 mm |
| Type I Spacing | 0 mm to 25,000 mm |
| Type J Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type J Shape | RHS, Round bar, Solid square |
| Type J Width / Diameter | 6 mm to 200 mm |
| Type J Depth | 6 mm to 200 mm |
| Type J Gauge | 1 mm to 6 mm |
| Type J Spacing | 0 mm to 25,000 mm |
| Gap Type 1 → Type 2 | 0 mm to 25,000 mm |
| Gap Type 2 → Type 3 | 0 mm to 25,000 mm |
| Gap Type 3 → Type 4 | 0 mm to 25,000 mm |
| Gap Type 4 → Type 5 | 0 mm to 25,000 mm |
| Gap Type 5 → Type 6 | 0 mm to 25,000 mm |
| Gap Type 6 → Type 7 | 0 mm to 25,000 mm |
| Gap Type 7 → Type 8 | 0 mm to 25,000 mm |
| Gap Type 8 → Type 9 | 0 mm to 25,000 mm |
| Gap Type 9 → Type 10 | 0 mm to 25,000 mm |
| Gap Between Repeats | 0 mm to 25,000 mm |
| Pattern Fit | Natural, Flush, Offset, Auto-repeat |
| Left Edge Offset | 0 mm to 25,000 mm |
| Left Keep-Out | 0 mm to 25,000 mm |
| Right Keep-Out | 0 mm to 25,000 mm |
| Batten Overhang Top | 0 mm to 10,000 mm |
| Batten Overhang Bottom | -300 mm to 1,000 mm |
| End Cap Height | 0 mm to 1,000 mm |
| Hardware Drawing | Drawn simply, Real size, with brackets and fittings |
| Wheel Diameter | 1 mm to 1,000 mm |
| Wheel Width | 1 mm to 5,000 mm |
| Wheel Groove | U groove, V groove, Round groove |
| Wheel Mount | Bracket under the rail, Axle through the rail |
| Wheel Bracket Length | 1 mm to 10,000 mm |
| Wheel Bracket Height | 0 mm to 1,000 mm |
| Wheel Bracket Thickness | 1 mm to 1,000 mm |
| Wheel Axle Diameter | 1 mm to 2,500 mm |
| Wheel Set-out | End offsets, even between, Each wheel positioned |
| Left Wheel Offset | 0 mm to 30,000 mm |
| Right Wheel Offset | 0 mm to 30,000 mm |
| Wheel 1 Position | 0 mm to 100,000 mm |
| Wheel 2 Position | 0 mm to 100,000 mm |
| Wheel 3 Position | 0 mm to 100,000 mm |
| Wheel 4 Position | 0 mm to 100,000 mm |
| Wheel 5 Position | 0 mm to 100,000 mm |
| Wheel 6 Position | 0 mm to 100,000 mm |
| Wheel 7 Position | 0 mm to 100,000 mm |
| Wheel 8 Position | 0 mm to 100,000 mm |
| Track Profile | Round bar on flat, Inverted V angle, U channel |
| Track Height | 1 mm to 2,500 mm |
| Track Base Width | 1 mm to 10,000 mm |
| Track Base Thickness | 1 mm to 1,000 mm |
| Track Bar Diameter | 1 mm to 2,500 mm |
| Track Angle Leg | 1 mm to 5,000 mm |
| Track Channel Width | 1 mm to 10,000 mm |
| Track Fixing Centres | 50 mm to 100,000 mm |
| Track End Allowance | 0 mm to 50,000 mm |
| Mid Rail 1 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 1 Position | 0 mm to 50,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 2 Position | 0 mm to 50,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 3 Position | 0 mm to 50,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 4 Position | 0 mm to 50,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 5 Position | 0 mm to 50,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 6 Position | 0 mm to 50,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Rack Centre Height | 0 mm to 12,000 mm |
| Rack Length | 0 mm to 100,000 mm |
| Rack Height | 1 mm to 1,000 mm |
| Rack Thickness | 1 mm to 2,500 mm |
| Rack Fixing Centres | 50 mm to 50,000 mm |
| Rack Stand-off | 0 mm to 5,000 mm |
| Motor Side | Run-back side, Left, Right |
| Motor From Opening | 0 mm to 12,000 mm |
| Motor Length | 1 mm to 5,000 mm |
| Motor Width | 1 mm to 5,000 mm |
| Motor Height | 1 mm to 10,000 mm |
| Pinion Height | 0 mm to 5,000 mm |
| Motor Pad Length | 1 mm to 20,000 mm |
| Motor Pad Width | 1 mm to 50,000 mm |
| Motor Pad Thickness | 1 mm to 1,000 mm |
| Motor Pad Setback | 0 mm to 500 mm |
| Tail Sizing | To suit the motor, As entered |
| Post Above Gate | 0 mm to 10,000 mm |
| Post Attachment | Concrete into Ground, Bolted to Slab |
| Post Depth in Concrete | 0 mm to 100,000 mm |
| Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Post Side Clearance | 0 mm to 10,000 mm |
| Post Footing Width | 0 mm to 50,000 mm |
| Post Footing Depth | 0 mm to 100,000 mm |
| Base Plate Width | 1 mm to 25,000 mm |
| Base Plate Thickness | 1 mm to 1,000 mm |
| Base Plate Hole Diameter | 1 mm to 2,500 mm |
| Base Plate Hole Inset | 0 mm to 10,000 mm |
| Guide Rollers | 2 (one each side), 4 (two each side) |
| Guide Roller Diameter | 1 mm to 5,000 mm |
| Guide Roller Height | 1 mm to 10,000 mm |
| Guide Roller Clearance | 0 mm to 1,000 mm |
| Guide Bracket Length | 0 mm to 50,000 mm |
| Guide Bracket Width | 1 mm to 25,000 mm |
| Guide Bracket Thickness | 1 mm to 1,000 mm |
| Receiver Height | 1 mm to 5,000 mm |
| Receiver Depth | 1 mm to 10,000 mm |
| Receiver Thickness | 1 mm to 1,000 mm |
| Receiver Clearance | 0 mm to 1,000 mm |
| Receiver Centre Height | 0 mm to 12,000 mm |
| End Stop Length | 1 mm to 10,000 mm |
| End Stop Width | 1 mm to 10,000 mm |
| End Stop Height | 1 mm to 10,000 mm |
| End Stop Plate Thickness | 1 mm to 1,000 mm |
| Guide Post Height Above Ground | 0 mm to 12,000 mm |
| Guide Post Depth in Concrete | 0 mm to 100,000 mm |
| Guide Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Catch Post Height Above Ground | 0 mm to 12,000 mm |
| Catch Post Depth in Concrete | 0 mm to 100,000 mm |
| Catch Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Material | Aluminium, Steel, Galvanised steel, Stainless |
| Drawing Rules | Current rules, As drawn in October 2026, As saved before October 2026 |
Frequently Asked Questions
What opening widths does the Patterned Battened Telescopic Sliding Gate support?
The Patterned Battened Telescopic Sliding Gate accepts opening widths from 1,000 mm to 30,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Patterned Battened Telescopic Sliding Gate drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Patterned Battened Telescopic Sliding Gate?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Gates. Tags: gate, sliding, telescopic, battens, patterned, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
