Scalloped Timber Picket Double Swing Gate | Fabrication Drawings
Scalloped-top variant of the timber picket double swing gate: each leaf resolves its own dip or arch independently over its own span, so the pair reads symmetric with both leaves shut. Same ledged-and-braced construction, mirrored braces, drop bolt and latch.
Configure Scalloped Timber Picket Double Swing Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,800 mm to 6,000 mm |
| Clear Opening Height | 900 mm to 2,100 mm |
| Gap Below Pickets | 0 mm to 500 mm |
| Leaf Split | Equal, Custom |
| Left Leaf Width | 500 mm to 6,000 mm |
| Number of Rails | 2 Rails, 3 Rails |
| Top Rail Inset | 0 mm to 900 mm |
| Bottom Rail Inset | 0 mm to 900 mm |
| Picket Head | Pointed (Gothic), Dog Ear, Round, French Gothic, Flat (Square) |
| Head Height | 20 mm to 200 mm |
| Dog Ear Clip | 5 mm to 40 mm |
| Picket Spacing Method | Fixed Gap, Number of Pickets |
| Picket Gap | 0 mm to 150 mm |
| Timber Species | Treated Pine, Hardwood |
| Scallop Depth | 20 mm to 600 mm |
| Scallop Direction | Concave (Dipped), Convex (Arched) |
| Post Top | Flat (sawn), Pointed cap |
| Left Gate Post Material | Timber, Steel (galvanised), Aluminium |
| Left Gate Post Attachment | Concrete into Ground, Bolted to Slab, Footplate |
| Left Gate Post Concrete Depth | 25 mm to 3,000 mm |
| Left Gate Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Left Gate Post Hole Ø | 2 mm to 50 mm |
| Left Gate Post Hole Edge Inset | 0 mm to 200 mm |
| Left Gate Post Footplate Width | 50 mm to 500 mm |
| Left Gate Post Footplate Depth | 50 mm to 500 mm |
| Left Gate Post Footplate Thickness | 6 mm to 25 mm |
| Right Gate Post Material | Timber, Steel (galvanised), Aluminium |
| Right Gate Post Attachment | Concrete into Ground, Bolted to Slab, Footplate |
| Right Gate Post Concrete Depth | 25 mm to 3,000 mm |
| Right Gate Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Gate Post Hole Ø | 2 mm to 50 mm |
| Right Gate Post Hole Edge Inset | 0 mm to 200 mm |
| Right Gate Post Footplate Width | 50 mm to 500 mm |
| Right Gate Post Footplate Depth | 50 mm to 500 mm |
| Right Gate Post Footplate Thickness | 6 mm to 25 mm |
| Hinge Side Clearance | 5 mm to 60 mm |
| Meeting Gap | 3 mm to 80 mm |
| Brace | Diagonal compression brace, No brace |
| Latch | Suffolk ring latch, D-handle latch, Pad bolt, None |
| Picket Fixing | Screws, Nails |
| Hinge Type | Bolt-on plate hinge, Not shown |
| Hinge Positions | One on each ledge, Near the ends, Evenly spaced, Custom heights |
| Hinge 1 Height | 0 mm to 4,000 mm |
| Hinge 2 Height | 0 mm to 4,000 mm |
| Hinge 3 Height | 0 mm to 4,000 mm |
| Hinge 4 Height | 0 mm to 4,000 mm |
| Hinge Plate Height | 30 mm to 300 mm |
| Hinge Plate Depth | 20 mm to 300 mm |
| Hinge Plate Thickness | 2 mm to 25 mm |
| Hinge Bolt Ø | 4 mm to 30 mm |
| Hinge Bolt Edge Inset | 0 mm to 100 mm |
| Hinge Plate Standoff | 0 mm to 100 mm |
Frequently Asked Questions
What opening widths does the Scalloped Timber Picket Double Swing Gate support?
The Scalloped Timber Picket Double Swing Gate accepts opening widths from 1,800 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What heights can the Scalloped Timber Picket Double Swing Gate be?
Heights range from 900 mm to 2,100 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Scalloped Timber Picket Double Swing Gate drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Scalloped Timber Picket Double Swing Gate?
Yes, on the Fabricator tier. Saved jobs store every input you entered and reload the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions. The free Explorer tier doesn't persist jobs, but you can still copy your inputs out manually.
References & technology
Category: Gates. Tags: gate, double-swing, swing, driveway, fencing, timber, timber-picket, scalloped, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.