Spear-Top Pedestrian Gate with Side Panels | Fabrication Drawings
Parametric palisade pedestrian gate with fixed side panels. Gate has a rectangular hollow-tube frame with a row of square or round spear shafts (typically 25x25x1.2 SHS) topped with crimped pyramid or cast arrowhead tips. Side panels are welded to gate posts with matching frame and spear infill so the run reads as a single palisade broken only by the gate posts. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.
Configure Spear-Top Pedestrian Gate with Side Panels dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Overall Width | 1,200 mm to 12,000 mm |
| Clear Opening Width | 600 mm to 6,000 mm |
| Clear Opening Height | 600 mm to 3,000 mm |
| Gap Below Gate | 10 mm to 300 mm |
| Hinge Tolerance | 5 mm to 50 mm |
| Latch Tolerance | 5 mm to 50 mm |
| Lock Type | No Lock/Handle, Lever Handle Lock, Ball Handle Lock, Mortice Lock, Lokklatch, Other |
| Lockbox Width | 40 mm to 300 mm |
| Lockbox Height | 80 mm to 400 mm |
| Lockbox Height from Ground | 500 mm to 1,600 mm |
| Weld Plate To | Latch Stile (gate), Latch Post (frame) |
| Catch Plate Face | Back (property side), Front (street side) |
| Catch Plate Position | Top of gate, Bottom of gate, Custom height |
| Height from Ground | 100 mm to 2,400 mm |
| Plate Width | 30 mm to 200 mm |
| Plate Height | 30 mm to 200 mm |
| Plate Thickness | 3 mm to 12 mm |
| Panel Configuration | Left Only, Right Only, Both Sides |
| Wall Inset | 0 mm to 100 mm |
| Panel Gap Below | 0 mm to 300 mm |
| Mid Rail 1 Orientation | Horizontal, Vertical |
| Mid Rail 1 Position | 0 mm to 10,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical |
| Mid Rail 2 Position | 0 mm to 10,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical |
| Mid Rail 3 Position | 0 mm to 10,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical |
| Mid Rail 4 Position | 0 mm to 10,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical |
| Mid Rail 5 Position | 0 mm to 10,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical |
| Mid Rail 6 Position | 0 mm to 10,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Footplate Width | 50 mm to 500 mm |
| Footplate Depth | 50 mm to 500 mm |
| Footplate Thickness | 6 mm to 25 mm |
| Left Outer Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Outer Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Outer Post Concrete Depth | 50 mm to 1,500 mm |
| Left Outer Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Outer Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Outer Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Outer Post Concrete Depth | 50 mm to 1,500 mm |
| Right Outer Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Spear Distribution | Fixed Gap, Number of Spears |
| Spear Spacing | 0 mm to 500 mm |
| Spear Offset from Edge | 0 mm to 2,000 mm |
| Spear Top Treatment | Through Top Rail (protrudes above), Flush with Top Rail |
| Spear Top Protrusion | 0 mm to 500 mm |
| Spear Bottom Treatment | Through Bottom Rail (protrudes below), Flush with Bottom Rail, Cut Into Bottom Rail (sits on top) |
| Spear Bottom Protrusion | 0 mm to 500 mm |
| Spear Mounting | Face-Fixed (front of frame), Pierce Frame (centred through rails) |
| Tip Style | Crimped Pyramid, Cast Arrowhead |
| Tip Height | 0 mm to 300 mm |
| Arrowhead Base Width | 12 mm to 100 mm |
| Arrowhead Base Depth | 12 mm to 100 mm |
| Arrowhead Collar Height | 0 mm to 50 mm |
| Arrowhead Collar Overhang | 0 mm to 20 mm |
Frequently Asked Questions
What opening widths does the Spear-Top Pedestrian Gate with Side Panels support?
The Spear-Top Pedestrian Gate with Side Panels accepts opening widths from 600 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What heights can the Spear-Top Pedestrian Gate with Side Panels be?
Heights range from 600 mm to 3,000 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Spear-Top Pedestrian Gate with Side Panels drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Spear-Top Pedestrian Gate with Side Panels?
Yes, on the Fabricator and Fleet tiers. Saved jobs store every input you entered and reload the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions. The free Explorer tier doesn't persist jobs, but you can still copy your inputs out manually.
References & technology
Category: Gates. Tags: gate, pedestrian, spear, palisade, side-panels, security, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and galvanised steel.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.