Patterned Battened Oversized Sliding Gate | Fabrication Drawings
Oversized tracked sliding gate for openings over 6 metres, split into top and bottom sections for transport and powder coating, with a mixed-profile vertical batten pattern. Define 2 to 10 batten types (SHS, RHS, round bar, angle or solid square) with their counts, spacings and the gaps between types to build a repeating pattern across each transportable piece. Each piece gets its own sheet. The drawing starts as the gate on plain wheels: the ground track, posts, end stops and real-size hardware are add-ons you switch on.
Configure Patterned Battened Oversized Sliding Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,000 mm to 30,000 mm |
| Overlap Allowance | 0 mm to 10,000 mm |
| Overlap Allowance Right | 0 mm to 10,000 mm |
| Gate Height & Rake | Level, Single rake, Double rake |
| Clear Height (Left) | 300 mm to 12,000 mm |
| Clear Height (Right) | 300 mm to 12,000 mm |
| Datum to Top (Left) | 0 mm to 12,000 mm |
| Datum to Bottom (Left) | 0 mm to 12,000 mm |
| Datum to Top (Right) | 0 mm to 12,000 mm |
| Datum to Bottom (Right) | 0 mm to 12,000 mm |
| Ground Clearance | 0 mm to 1,000 mm |
| Mid Rail 1 Orientation | Horizontal, Vertical |
| Mid Rail 1 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 1 Position | 0 mm to 50,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical |
| Mid Rail 2 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 2 Position | 0 mm to 50,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical |
| Mid Rail 3 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 3 Position | 0 mm to 50,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical |
| Mid Rail 4 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 4 Position | 0 mm to 50,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical |
| Mid Rail 5 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 5 Position | 0 mm to 50,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical |
| Mid Rail 6 Follows | Level, Follow top rail, Follow bottom rail |
| Mid Rail 6 Position | 0 mm to 50,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Split Height | 50 mm to 30,000 mm |
| Split Joint Type | Welded spigots (hidden joint), Bolted rail joint (rear-bolted) |
| Joint Rail Height | 10 mm to 500 mm |
| Joint Rail Depth | 10 mm to 1,000 mm |
| Sleeve Length | 20 mm to 5,000 mm |
| Sleeve Clearance | 0 mm to 50 mm |
| Fixed Bay Width | 50 mm to 50,000 mm |
| Bracing | None, Diagonal per bay, Top chord truss |
| Brace Direction | Alternating, Uniform |
| Chord Height Above Top Rail | 10 mm to 2,000 mm |
| Hinge Tolerance | 0 mm to 500 mm |
| Latch Tolerance | 0 mm to 500 mm |
| Bottom Gap | 0 mm to 2,000 mm |
| Lockbox Width | 10 mm to 2,000 mm |
| Lockbox Height | 10 mm to 2,000 mm |
| Lockbox Height from Ground | 0 mm to 10,000 mm |
| Lock Type | Lever Handle, Ball Handle, Mortice (CNC into frame), Lokklatch (frame mounted), Other |
| Corner Joint | Mitre, Butt |
| Hinge Type | Not shown, Weld-on butt hinge, Bolt-on plate hinge, Pivot bearing (top and bottom), Weld-on bullet hinge, Adjustable eye-bolt hinge, 180 degree hinge, Face-fixed self-closing hinge |
| Bearing Unit | Custom (enter sizes below), UCP207 pillow block (2 bolt, 35 mm bore), UCF207 square flange (4 bolt, 35 mm bore) |
| Hinge Positions | Near the ends, Evenly spaced, Custom heights |
| Hinge 1 Height | 0 mm to 6,000 mm |
| Hinge 2 Height | 0 mm to 6,000 mm |
| Hinge 3 Height | 0 mm to 6,000 mm |
| Hinge 4 Height | 0 mm to 6,000 mm |
| Hinge Plate Width | 1 mm to 3,000 mm |
| Hinge Plate Depth | 1 mm to 15,000 mm |
| Hinge Plate Thickness | 1 mm to 5,000 mm |
| Hinge Bolt Hole Diameter | 1 mm to 2,500 mm |
| Hinge Bolt Inset | 0 mm to 6,000 mm |
| Bearing Boss Diameter | 1 mm to 12,000 mm |
| Bearing Pin Diameter | 1 mm to 6,000 mm |
| Bearing Pin Length | 1 mm to 3,000 mm |
| Hinge Plate Offset | 0 mm to 6,000 mm |
| Bullet Hinge Length | 60 mm to 250 mm |
| Bullet Hinge Diameter | 12 mm to 40 mm |
| Eye Bolt Thread | M12, M16, M20 |
| Eye Bolt Reach | 40 mm to 120 mm |
| 180 Hinge Length | 50 mm to 250 mm |
| 180 Hinge Knuckle | 10 mm to 40 mm |
| Hinge Fitted Side | Back of the gate, Front of the gate (opens outwards) |
| Self-Closing Hinge Length | 50 mm to 300 mm |
| Self-Closing Hinge Leaf Width | 20 mm to 100 mm |
| Self-Closing Hinge Knuckle | 10 mm to 50 mm |
| Hinge Pin Offset | 0 mm to 120 mm |
| Catch Plate Face | Back (property side), Front (street side) |
| Catch Plate Position | Top of gate, Bottom of gate, Custom height |
| Height from Ground | 0 mm to 6,000 mm |
| Plate Width | 1 mm to 12,000 mm |
| Plate Height | 1 mm to 6,000 mm |
| Plate Thickness | 1 mm to 600 mm |
| Plate Overhang | Centred on the edge, Custom |
| Overhang Past Edge | 0 mm to 5,000 mm |
| Plate Material | Stainless steel, Aluminium, Galvanised steel |
| Number of Batten Types | 2 types, 3 types, 4 types, 5 types, 6 types, 7 types, 8 types, 9 types, 10 types |
| Type A Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type A Shape | RHS, Round bar, Solid square |
| Type A Width / Diameter | 6 mm to 200 mm |
| Type A Depth | 6 mm to 200 mm |
| Type A Gauge | 1 mm to 6 mm |
| Type A Spacing | 0 mm to 25,000 mm |
| Type B Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type B Shape | RHS, Round bar, Solid square |
| Type B Width / Diameter | 6 mm to 200 mm |
| Type B Depth | 6 mm to 200 mm |
| Type B Gauge | 1 mm to 6 mm |
| Type B Spacing | 0 mm to 25,000 mm |
| Type C Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type C Shape | RHS, Round bar, Solid square |
| Type C Width / Diameter | 6 mm to 200 mm |
| Type C Depth | 6 mm to 200 mm |
| Type C Gauge | 1 mm to 6 mm |
| Type C Spacing | 0 mm to 25,000 mm |
| Type D Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type D Shape | RHS, Round bar, Solid square |
| Type D Width / Diameter | 6 mm to 200 mm |
| Type D Depth | 6 mm to 200 mm |
| Type D Gauge | 1 mm to 6 mm |
| Type D Spacing | 0 mm to 25,000 mm |
| Type E Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type E Shape | RHS, Round bar, Solid square |
| Type E Width / Diameter | 6 mm to 200 mm |
| Type E Depth | 6 mm to 200 mm |
| Type E Gauge | 1 mm to 6 mm |
| Type E Spacing | 0 mm to 25,000 mm |
| Type F Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type F Shape | RHS, Round bar, Solid square |
| Type F Width / Diameter | 6 mm to 200 mm |
| Type F Depth | 6 mm to 200 mm |
| Type F Gauge | 1 mm to 6 mm |
| Type F Spacing | 0 mm to 25,000 mm |
| Type G Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type G Shape | RHS, Round bar, Solid square |
| Type G Width / Diameter | 6 mm to 200 mm |
| Type G Depth | 6 mm to 200 mm |
| Type G Gauge | 1 mm to 6 mm |
| Type G Spacing | 0 mm to 25,000 mm |
| Type H Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type H Shape | RHS, Round bar, Solid square |
| Type H Width / Diameter | 6 mm to 200 mm |
| Type H Depth | 6 mm to 200 mm |
| Type H Gauge | 1 mm to 6 mm |
| Type H Spacing | 0 mm to 25,000 mm |
| Type I Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type I Shape | RHS, Round bar, Solid square |
| Type I Width / Diameter | 6 mm to 200 mm |
| Type I Depth | 6 mm to 200 mm |
| Type I Gauge | 1 mm to 6 mm |
| Type I Spacing | 0 mm to 25,000 mm |
| Type J Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type J Shape | RHS, Round bar, Solid square |
| Type J Width / Diameter | 6 mm to 200 mm |
| Type J Depth | 6 mm to 200 mm |
| Type J Gauge | 1 mm to 6 mm |
| Type J Spacing | 0 mm to 25,000 mm |
| Gap Type 1 → Type 2 | 0 mm to 25,000 mm |
| Gap Type 2 → Type 3 | 0 mm to 25,000 mm |
| Gap Type 3 → Type 4 | 0 mm to 25,000 mm |
| Gap Type 4 → Type 5 | 0 mm to 25,000 mm |
| Gap Type 5 → Type 6 | 0 mm to 25,000 mm |
| Gap Type 6 → Type 7 | 0 mm to 25,000 mm |
| Gap Type 7 → Type 8 | 0 mm to 25,000 mm |
| Gap Type 8 → Type 9 | 0 mm to 25,000 mm |
| Gap Type 9 → Type 10 | 0 mm to 25,000 mm |
| Gap Between Repeats | 0 mm to 25,000 mm |
| Pattern Fit | Natural, Flush, Offset, Auto-repeat |
| Left Edge Offset | 0 mm to 25,000 mm |
| Left Keep-Out | 0 mm to 25,000 mm |
| Right Keep-Out | 0 mm to 25,000 mm |
| Motor Tail Length | 0 mm to 30,000 mm |
| Top Tail Length | 0 mm to 20,000 mm |
| Tail Brace | None, Diagonal |
| Hardware Drawing | Drawn simply, Real size, with brackets and fittings |
| Wheel Diameter | 1 mm to 1,000 mm |
| Wheel Width | 1 mm to 5,000 mm |
| Wheel Groove | U groove, V groove, Round groove |
| Wheel Mount | Bracket under the rail, Axle through the rail |
| Wheel Bracket Length | 1 mm to 10,000 mm |
| Wheel Bracket Height | 0 mm to 1,000 mm |
| Wheel Bracket Thickness | 1 mm to 1,000 mm |
| Wheel Axle Diameter | 1 mm to 2,500 mm |
| Wheel Set-out | End offsets, even between, Each wheel positioned |
| Left Wheel Offset | 0 mm to 30,000 mm |
| Right Wheel Offset | 0 mm to 30,000 mm |
| Wheel 1 Position | 0 mm to 100,000 mm |
| Wheel 2 Position | 0 mm to 100,000 mm |
| Wheel 3 Position | 0 mm to 100,000 mm |
| Wheel 4 Position | 0 mm to 100,000 mm |
| Wheel 5 Position | 0 mm to 100,000 mm |
| Wheel 6 Position | 0 mm to 100,000 mm |
| Wheel 7 Position | 0 mm to 100,000 mm |
| Wheel 8 Position | 0 mm to 100,000 mm |
| Track Profile | Round bar on flat, Inverted V angle, U channel |
| Track Height | 1 mm to 2,500 mm |
| Track Base Width | 1 mm to 10,000 mm |
| Track Base Thickness | 1 mm to 1,000 mm |
| Track Bar Diameter | 1 mm to 2,500 mm |
| Track Angle Leg | 1 mm to 5,000 mm |
| Track Channel Width | 1 mm to 10,000 mm |
| Track Fixing Centres | 50 mm to 100,000 mm |
| Track End Allowance | 0 mm to 50,000 mm |
| Rack Centre Height | 0 mm to 12,000 mm |
| Rack Length | 0 mm to 100,000 mm |
| Rack Height | 1 mm to 1,000 mm |
| Rack Thickness | 1 mm to 2,500 mm |
| Rack Fixing Centres | 50 mm to 50,000 mm |
| Rack Stand-off | 0 mm to 5,000 mm |
| Motor Side | Run-back side, Left, Right |
| Motor From Opening | 0 mm to 12,000 mm |
| Motor Length | 1 mm to 5,000 mm |
| Motor Width | 1 mm to 5,000 mm |
| Motor Height | 1 mm to 10,000 mm |
| Pinion Height | 0 mm to 5,000 mm |
| Motor Pad Length | 1 mm to 20,000 mm |
| Motor Pad Width | 1 mm to 50,000 mm |
| Motor Pad Thickness | 1 mm to 1,000 mm |
| Motor Pad Setback | 0 mm to 500 mm |
| Tail Sizing | To suit the motor, As entered |
| Post Above Gate | 0 mm to 10,000 mm |
| Post Attachment | Concrete into Ground, Bolted to Slab |
| Post Depth in Concrete | 0 mm to 100,000 mm |
| Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Post Side Clearance | 0 mm to 10,000 mm |
| Post Footing Width | 0 mm to 50,000 mm |
| Post Footing Depth | 0 mm to 100,000 mm |
| Base Plate Width | 1 mm to 25,000 mm |
| Base Plate Thickness | 1 mm to 1,000 mm |
| Base Plate Hole Diameter | 1 mm to 2,500 mm |
| Base Plate Hole Inset | 0 mm to 10,000 mm |
| Guide Rollers | 2 (one each side), 4 (two each side) |
| Guide Roller Diameter | 1 mm to 5,000 mm |
| Guide Roller Height | 1 mm to 10,000 mm |
| Guide Roller Clearance | 0 mm to 1,000 mm |
| Guide Bracket Length | 0 mm to 50,000 mm |
| Guide Bracket Width | 1 mm to 25,000 mm |
| Guide Bracket Thickness | 1 mm to 1,000 mm |
| Receiver Height | 1 mm to 5,000 mm |
| Receiver Depth | 1 mm to 10,000 mm |
| Receiver Thickness | 1 mm to 1,000 mm |
| Receiver Clearance | 0 mm to 1,000 mm |
| Receiver Centre Height | 0 mm to 12,000 mm |
| End Stop Length | 1 mm to 10,000 mm |
| End Stop Width | 1 mm to 10,000 mm |
| End Stop Height | 1 mm to 10,000 mm |
| End Stop Plate Thickness | 1 mm to 1,000 mm |
| Guide Post Height Above Ground | 0 mm to 12,000 mm |
| Guide Post Depth in Concrete | 0 mm to 100,000 mm |
| Guide Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Catch Post Height Above Ground | 0 mm to 12,000 mm |
| Catch Post Depth in Concrete | 0 mm to 100,000 mm |
| Catch Post Clearance Behind Gate | 0 mm to 25,000 mm |
| Material | Aluminium, Steel, Galvanised steel, Stainless |
| Drawing Rules | Current rules, As drawn in October 2026, As saved before October 2026 |
| Rake Heights Measured At | Opening edges, Leaf ends |
Frequently Asked Questions
What opening widths does the Patterned Battened Oversized Sliding Gate support?
The Patterned Battened Oversized Sliding Gate accepts opening widths from 1,000 mm to 30,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Patterned Battened Oversized Sliding Gate drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Patterned Battened Oversized Sliding Gate?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Gates. Tags: gate, sliding, battens, oversized, industrial, patterned, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
