Battened Sliding Gate | Fabrication Drawings
Parametric sliding gate with a rectangular hollow-tube frame and vertical battens face-fixed to the front. Supports optional tail extension for motor automation and optional L-piece top rail.
Configure Battened Sliding Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 1,000 mm to 12,000 mm |
| Overlap Allowance | 0 mm to 500 mm |
| Overlap Allowance Right | 0 mm to 500 mm |
| Gate Height & Rake | Level, Single rake, Double rake |
| Clear Height (Left) | 600 mm to 4,000 mm |
| Clear Height (Right) | 600 mm to 4,000 mm |
| Datum to Top (Left) | 0 mm to 4,000 mm |
| Datum to Bottom (Left) | 0 mm to 4,000 mm |
| Datum to Top (Right) | 0 mm to 4,000 mm |
| Datum to Bottom (Right) | 0 mm to 4,000 mm |
| Wheel + Track Allowance | 0 mm to 150 mm |
| Mid Rail 1 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 1 Position | 0 mm to 10,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 2 Position | 0 mm to 10,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 3 Position | 0 mm to 10,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 4 Position | 0 mm to 10,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 5 Position | 0 mm to 10,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical, Diagonal |
| Mid Rail 6 Position | 0 mm to 10,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Batten Distribution | Fixed Gap, Number of Battens |
| Batten Spacing | 1 mm to 200 mm |
| Batten Offset from Edge | 0 mm to 500 mm |
| Batten Overhang Top | 0 mm to 500 mm |
| Batten Overhang Bottom | 0 mm to 500 mm |
| End Cap Height | 1 mm to 20 mm |
| Tail Length | 0 mm to 2,000 mm |
| Top Tail Length | 0 mm to 3,000 mm |
| Wheel Offset from End | 100 mm to 1,000 mm |
Frequently Asked Questions
What opening widths does the Battened Sliding Gate support?
The Battened Sliding Gate accepts opening widths from 1,000 mm to 12,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Battened Sliding Gate drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Battened Sliding Gate?
Yes, on the Fabricator and Fleet tiers. Saved jobs store every input you entered and reload the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions. The free Explorer tier doesn't persist jobs, but you can still copy your inputs out manually.
References & technology
Category: Gates. Tags: gate, sliding, battens, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and galvanised steel.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.