Patterned Battened Pedestrian Gate with Side Panels | Fabrication Drawings
Pedestrian gate with fixed side panels. The gate carries a mixed-profile vertical batten pattern while the side panels use evenly spaced battens. Side panels are welded to gate posts with matching frames. Supports left, right, or both panels, optional outer posts, optional panel vertical framing, and panel mid-rail.
Configure Patterned Battened Pedestrian Gate with Side Panels dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Overall Width | 1,200 mm to 12,000 mm |
| Gate Width | 600 mm to 6,000 mm |
| Clear Opening Height | 600 mm to 3,000 mm |
| Gap Below Gate | 10 mm to 300 mm |
| Corner Joint | Mitre, Butt |
| Mid Rail 1 Orientation | Horizontal, Vertical |
| Mid Rail 1 Position | 0 mm to 10,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical |
| Mid Rail 2 Position | 0 mm to 10,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical |
| Mid Rail 3 Position | 0 mm to 10,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical |
| Mid Rail 4 Position | 0 mm to 10,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical |
| Mid Rail 5 Position | 0 mm to 10,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical |
| Mid Rail 6 Position | 0 mm to 10,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Number of Batten Types | 2 types, 3 types, 4 types, 5 types, 6 types, 7 types, 8 types, 9 types, 10 types |
| Type A Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type A Shape | RHS, Round bar, Solid square |
| Type A Width / Diameter | 6 mm to 200 mm |
| Type A Depth | 6 mm to 200 mm |
| Type A Gauge | 1 mm to 6 mm |
| Type A Spacing | 0 mm to 200 mm |
| Type B Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type B Shape | RHS, Round bar, Solid square |
| Type B Width / Diameter | 6 mm to 200 mm |
| Type B Depth | 6 mm to 200 mm |
| Type B Gauge | 1 mm to 6 mm |
| Type B Spacing | 0 mm to 200 mm |
| Type C Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type C Shape | RHS, Round bar, Solid square |
| Type C Width / Diameter | 6 mm to 200 mm |
| Type C Depth | 6 mm to 200 mm |
| Type C Gauge | 1 mm to 6 mm |
| Type C Spacing | 0 mm to 200 mm |
| Type D Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type D Shape | RHS, Round bar, Solid square |
| Type D Width / Diameter | 6 mm to 200 mm |
| Type D Depth | 6 mm to 200 mm |
| Type D Gauge | 1 mm to 6 mm |
| Type D Spacing | 0 mm to 200 mm |
| Type E Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type E Shape | RHS, Round bar, Solid square |
| Type E Width / Diameter | 6 mm to 200 mm |
| Type E Depth | 6 mm to 200 mm |
| Type E Gauge | 1 mm to 6 mm |
| Type E Spacing | 0 mm to 200 mm |
| Type F Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type F Shape | RHS, Round bar, Solid square |
| Type F Width / Diameter | 6 mm to 200 mm |
| Type F Depth | 6 mm to 200 mm |
| Type F Gauge | 1 mm to 6 mm |
| Type F Spacing | 0 mm to 200 mm |
| Type G Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type G Shape | RHS, Round bar, Solid square |
| Type G Width / Diameter | 6 mm to 200 mm |
| Type G Depth | 6 mm to 200 mm |
| Type G Gauge | 1 mm to 6 mm |
| Type G Spacing | 0 mm to 200 mm |
| Type H Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type H Shape | RHS, Round bar, Solid square |
| Type H Width / Diameter | 6 mm to 200 mm |
| Type H Depth | 6 mm to 200 mm |
| Type H Gauge | 1 mm to 6 mm |
| Type H Spacing | 0 mm to 200 mm |
| Type I Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type I Shape | RHS, Round bar, Solid square |
| Type I Width / Diameter | 6 mm to 200 mm |
| Type I Depth | 6 mm to 200 mm |
| Type I Gauge | 1 mm to 6 mm |
| Type I Spacing | 0 mm to 200 mm |
| Type J Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 65 x 16 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type J Shape | RHS, Round bar, Solid square |
| Type J Width / Diameter | 6 mm to 200 mm |
| Type J Depth | 6 mm to 200 mm |
| Type J Gauge | 1 mm to 6 mm |
| Type J Spacing | 0 mm to 200 mm |
| Gap Type 1 → Type 2 | 0 mm to 300 mm |
| Gap Type 2 → Type 3 | 0 mm to 300 mm |
| Gap Type 3 → Type 4 | 0 mm to 300 mm |
| Gap Type 4 → Type 5 | 0 mm to 300 mm |
| Gap Type 5 → Type 6 | 0 mm to 300 mm |
| Gap Type 6 → Type 7 | 0 mm to 300 mm |
| Gap Type 7 → Type 8 | 0 mm to 300 mm |
| Gap Type 8 → Type 9 | 0 mm to 300 mm |
| Gap Type 9 → Type 10 | 0 mm to 300 mm |
| Gap Between Repeats | 0 mm to 300 mm |
| Pattern Fit | Natural, Flush, Offset, Auto-repeat |
| Left Edge Offset | 0 mm to 500 mm |
| Left Keep-Out | 0 mm to 500 mm |
| Right Keep-Out | 0 mm to 500 mm |
| Batten Overhang Top | 0 mm to 500 mm |
| Batten Overhang Bottom | -300 mm to 500 mm |
| End Cap Height | 1 mm to 20 mm |
| Hinge Tolerance | 5 mm to 50 mm |
| Latch Tolerance | 5 mm to 50 mm |
| Lock Type | No Lock/Handle, Lever Handle Lock, Ball Handle Lock, Mortice Lock, Lokklatch, Other |
| Lockbox Width | 40 mm to 300 mm |
| Lockbox Height | 80 mm to 400 mm |
| Lockbox Height from Ground | 500 mm to 1,600 mm |
| Surround Plate Width | 50 mm to 500 mm |
| Surround Plate Height | 50 mm to 700 mm |
| Surround Plate Depth | 3 mm to 50 mm |
| Plate Height from Ground | 300 mm to 2,200 mm |
| Batten Overlap | 0 mm to 100 mm |
| Batten End Finish | Square cut, 45° taper |
| Hinge Type | Not shown, Weld-on butt hinge, Bolt-on plate hinge, Pivot bearing (top and bottom) |
| Bearing Unit | Custom (enter sizes below), UCP207 pillow block (2 bolt, 35 mm bore), UCF207 square flange (4 bolt, 35 mm bore) |
| Hinge Positions | Near the ends, Evenly spaced, Custom heights |
| Hinge 1 Height | 0 mm to 4,000 mm |
| Hinge 2 Height | 0 mm to 4,000 mm |
| Hinge 3 Height | 0 mm to 4,000 mm |
| Hinge 4 Height | 0 mm to 4,000 mm |
| Hinge Plate Width | 30 mm to 300 mm |
| Hinge Plate Depth | 30 mm to 300 mm |
| Hinge Plate Thickness | 3 mm to 80 mm |
| Hinge Bolt Hole Diameter | 4 mm to 40 mm |
| Hinge Bolt Inset | 0 mm to 100 mm |
| Bearing Boss Diameter | 10 mm to 200 mm |
| Bearing Pin Diameter | 6 mm to 120 mm |
| Bearing Pin Length | 10 mm to 200 mm |
| Hinge Plate Offset | 0 mm to 100 mm |
| Weld Plate To | Latch Stile (gate), Latch Post (frame) |
| Catch Plate Face | Back (property side), Front (street side) |
| Catch Plate Position | Top of gate, Bottom of gate, Custom height |
| Height from Ground | 100 mm to 2,400 mm |
| Plate Width | 30 mm to 200 mm |
| Plate Height | 30 mm to 200 mm |
| Plate Thickness | 3 mm to 12 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Footplate Width | 50 mm to 500 mm |
| Footplate Depth | 50 mm to 500 mm |
| Footplate Thickness | 6 mm to 25 mm |
| Left Post Hole Ø | 2 mm to 50 mm |
| Left Post Hole Edge Inset | 0 mm to 200 mm |
| Right Post Hole Ø | 2 mm to 50 mm |
| Right Post Hole Edge Inset | 0 mm to 200 mm |
| Left Post Footplate Width | 50 mm to 500 mm |
| Left Post Footplate Depth | 50 mm to 500 mm |
| Left Post Footplate Thickness | 6 mm to 25 mm |
| Right Post Footplate Width | 50 mm to 500 mm |
| Right Post Footplate Depth | 50 mm to 500 mm |
| Right Post Footplate Thickness | 6 mm to 25 mm |
| Panel Configuration | Left Only, Right Only, Both Sides |
| Panel Gap Below | 0 mm to 300 mm |
| Wall Inset | 0 mm to 100 mm |
| Panel Mid Rail Position | Match gate mid rail, Centre of panel |
| Batten Layout | Fixed Gap, Number of Battens |
| Batten Spacing | 3 mm to 200 mm |
| Panel Batten Keep-Out | 0 mm to 500 mm |
| Panel Right-Side Keep-Out | 0 mm to 500 mm |
| Panel Batten Overhang Top | 0 mm to 500 mm |
| Panel Batten Overhang Bottom | -300 mm to 500 mm |
| Panel End Cap Height | 1 mm to 20 mm |
| Left Outer Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Outer Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Outer Post Concrete Depth | 50 mm to 1,500 mm |
| Left Outer Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Outer Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Outer Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Outer Post Concrete Depth | 50 mm to 1,500 mm |
| Right Outer Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Left Outer Post Hole Ø | 2 mm to 50 mm |
| Left Outer Post Hole Edge Inset | 0 mm to 200 mm |
| Right Outer Post Hole Ø | 2 mm to 50 mm |
| Right Outer Post Hole Edge Inset | 0 mm to 200 mm |
| Left Outer Post Footplate Width | 50 mm to 500 mm |
| Left Outer Post Footplate Depth | 50 mm to 500 mm |
| Left Outer Post Footplate Thickness | 6 mm to 25 mm |
| Right Outer Post Footplate Width | 50 mm to 500 mm |
| Right Outer Post Footplate Depth | 50 mm to 500 mm |
| Right Outer Post Footplate Thickness | 6 mm to 25 mm |
Frequently Asked Questions
What opening widths does the Patterned Battened Pedestrian Gate with Side Panels support?
The Patterned Battened Pedestrian Gate with Side Panels accepts opening widths from 600 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What heights can the Patterned Battened Pedestrian Gate with Side Panels be?
Heights range from 600 mm to 3,000 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Patterned Battened Pedestrian Gate with Side Panels drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Patterned Battened Pedestrian Gate with Side Panels?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Gates. Tags: gate, pedestrian, battens, side-panels, patterned, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
