Decorative Sheet Privacy Screen | Fabrication Drawings
Privacy screen of decorative aluminium sheets: posts on footplates with a flat sheet fixed to the front of every bay carrying a laser-cut or routed design. One design runs across the screen, and any bay can take a design of its own. Starts as three equal bays, 3600 mm long and 1800 mm high: set the length, the number of bays, the height and the post fixing, with a DXF cut file for every sheet.
Configure Decorative Sheet Privacy Screen dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Total Run Length | 300 mm to 50,000 mm |
| Fence Height | 100 mm to 6,000 mm |
| Gap Below Fence | 0 mm to 6,000 mm |
| Post Spacing | 100 mm to 100,000 mm |
| Length Measured | Post centre to post centre, Outside of the end posts, Between the end posts |
| Bay Layout | Equal bays near the spacing, Fixed spacing with a make-up bay, A set number of equal bays, Custom bay widths |
| Make-up Bay | Last bay, First bay, Split between both ends |
| Smallest Make-up Bay | 0 mm to 50,000 mm |
| Bay 1 Width | 0 mm to 100,000 mm |
| Bay 2 Width | 0 mm to 100,000 mm |
| Bay 3 Width | 0 mm to 100,000 mm |
| Bay 4 Width | 0 mm to 100,000 mm |
| Bay 5 Width | 0 mm to 100,000 mm |
| Bay 6 Width | 0 mm to 100,000 mm |
| Bay 7 Width | 0 mm to 100,000 mm |
| Bay 8 Width | 0 mm to 100,000 mm |
| Bay 9 Width | 0 mm to 100,000 mm |
| Bay 10 Width | 0 mm to 100,000 mm |
| Bay 11 Width | 0 mm to 100,000 mm |
| Bay 12 Width | 0 mm to 100,000 mm |
| Bay 13 Width | 0 mm to 100,000 mm |
| Bay 14 Width | 0 mm to 100,000 mm |
| Bay 15 Width | 0 mm to 100,000 mm |
| Bay 16 Width | 0 mm to 100,000 mm |
| Bay 17 Width | 0 mm to 100,000 mm |
| Bay 18 Width | 0 mm to 100,000 mm |
| Bay 19 Width | 0 mm to 100,000 mm |
| Bay 20 Width | 0 mm to 100,000 mm |
| Bay 21 Width | 0 mm to 100,000 mm |
| Bay 22 Width | 0 mm to 100,000 mm |
| Bay 23 Width | 0 mm to 100,000 mm |
| Bay 24 Width | 0 mm to 100,000 mm |
| Bay 25 Width | 0 mm to 100,000 mm |
| Bay 26 Width | 0 mm to 100,000 mm |
| Bay 27 Width | 0 mm to 100,000 mm |
| Bay 28 Width | 0 mm to 100,000 mm |
| Bay 29 Width | 0 mm to 100,000 mm |
| Bay 30 Width | 0 mm to 100,000 mm |
| Start of Run | Post, Fixed to a wall, no post |
| Start Wall Gap | 0 mm to 1,000 mm |
| Start Post Fixing | Same as the run, Welded to the post, Brackets |
| End of Run | Post, Fixed to a wall, no post |
| End Wall Gap | 0 mm to 1,000 mm |
| End Post Fixing | Same as the run, Welded to the post, Brackets |
| Opening 1 Start | 0 mm to 100,000 mm |
| Opening 1 Width | 100 mm to 100,000 mm |
| Opening 2 Start | 0 mm to 100,000 mm |
| Opening 2 Width | 100 mm to 100,000 mm |
| Opening 3 Start | 0 mm to 100,000 mm |
| Opening 3 Width | 100 mm to 100,000 mm |
| Corner 1 Position | 0 mm to 100,000 mm |
| Corner 2 Position | 0 mm to 100,000 mm |
| Corner 3 Position | 0 mm to 100,000 mm |
| Corner 4 Position | 0 mm to 100,000 mm |
| Ground | Level, Sloping, bays stepped, Sloping, bays raked |
| Ground Levels | One even fall over the run, A level at each post |
| Rise Over the Run | -50,000 mm to 50,000 mm |
| Top of the Fence | Steps with the ground, One level top |
| Post 2 Ground Level | -50,000 mm to 50,000 mm |
| Post 3 Ground Level | -50,000 mm to 50,000 mm |
| Post 4 Ground Level | -50,000 mm to 50,000 mm |
| Post 5 Ground Level | -50,000 mm to 50,000 mm |
| Post 6 Ground Level | -50,000 mm to 50,000 mm |
| Post 7 Ground Level | -50,000 mm to 50,000 mm |
| Post 8 Ground Level | -50,000 mm to 50,000 mm |
| Post 9 Ground Level | -50,000 mm to 50,000 mm |
| Post 10 Ground Level | -50,000 mm to 50,000 mm |
| Post 11 Ground Level | -50,000 mm to 50,000 mm |
| Post 12 Ground Level | -50,000 mm to 50,000 mm |
| Post 13 Ground Level | -50,000 mm to 50,000 mm |
| Post 14 Ground Level | -50,000 mm to 50,000 mm |
| Post 15 Ground Level | -50,000 mm to 50,000 mm |
| Post 16 Ground Level | -50,000 mm to 50,000 mm |
| Post 17 Ground Level | -50,000 mm to 50,000 mm |
| Post 18 Ground Level | -50,000 mm to 50,000 mm |
| Post 19 Ground Level | -50,000 mm to 50,000 mm |
| Post 20 Ground Level | -50,000 mm to 50,000 mm |
| Post 21 Ground Level | -50,000 mm to 50,000 mm |
| Post 22 Ground Level | -50,000 mm to 50,000 mm |
| Post 23 Ground Level | -50,000 mm to 50,000 mm |
| Post 24 Ground Level | -50,000 mm to 50,000 mm |
| Post 25 Ground Level | -50,000 mm to 50,000 mm |
| Post 26 Ground Level | -50,000 mm to 50,000 mm |
| Post 27 Ground Level | -50,000 mm to 50,000 mm |
| Post 28 Ground Level | -50,000 mm to 50,000 mm |
| Post 29 Ground Level | -50,000 mm to 50,000 mm |
| Post 30 Ground Level | -50,000 mm to 50,000 mm |
| Post 31 Ground Level | -50,000 mm to 50,000 mm |
| Post 1 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 2 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 3 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 4 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 5 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 6 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 7 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 8 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 9 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 10 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 11 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 12 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 13 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 14 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 15 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 16 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 17 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 18 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 19 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 20 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 21 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 22 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 23 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 24 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 25 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 26 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 27 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 28 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 29 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 30 Type | Auto, Line post, End post, Corner post, Gate post |
| Post 31 Type | Auto, Line post, End post, Corner post, Gate post |
| Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Post Attachment | Concrete into Ground, Core Drilled, Bolted to Slab, Footplate |
| Post Concrete Depth | 0 mm to 25,000 mm |
| Footplate Position | Toe left, Toe right, Toe in, Toe out, Centre, Top left, Top right |
| Footplate Width | 10 mm to 25,000 mm |
| Footplate Depth | 10 mm to 25,000 mm |
| Footplate Thickness | 1 mm to 1,000 mm |
| Core Hole Depth | 0 mm to 25,000 mm |
| Core Hole Diameter | 10 mm to 25,000 mm |
| Footplate Hole Diameter | 1 mm to 2,500 mm |
| Footplate Hole Inset | 0 mm to 10,000 mm |
| Post Above Fence | 0 mm to 25,000 mm |
| Post Cap | None, Flat cap, Pyramid cap, Ball cap |
| Post Cap Height | 1 mm to 5,000 mm |
| Mid Rail Positions | Evenly spaced, Set each height |
| Mid Rail 1 Height | 0 mm to 6,000 mm |
| Mid Rail 2 Height | 0 mm to 6,000 mm |
| Mid Rail 3 Height | 0 mm to 6,000 mm |
| Corner Joint | Mitre, Butt |
| Frame Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Bottom Rail | Same as the frame, Its own section |
| Kickboard Height | 1 mm to 6,000 mm |
| Kickboard Thickness | 1 mm to 2,500 mm |
| Kickboard Ground Clearance | 0 mm to 6,000 mm |
| Sheet Thickness | 2 mm, 3 mm, 4 mm, 5 mm, 6 mm |
| Design Scaling | Stretch to fill, Fit, keep proportions, Tile at actual size |
| Fixing Pitch | 1 mm to 10,000 mm |
| End Posts | Same as the line posts, Its own section |
| End Post Depth in Concrete | 0 mm to 25,000 mm |
| Corner Posts | Same as the line posts, Its own section |
| Corner Post Depth in Concrete | 0 mm to 25,000 mm |
| Gate Posts | Same as the line posts, Its own section |
| Gate Post Depth in Concrete | 0 mm to 25,000 mm |
| Panels Fixed to Posts | Welded, Brackets |
| Bracket Type | Flat cleat behind the rail, Vertical plate beside the rail, End plate on the post or wall |
| Plate Direction | Up, Down, Left up, right down, Left down, right up |
| Plate Projection | 15 mm to 5,000 mm |
| Gap Between Panel and Post | 0 mm to 5,000 mm |
| Bracket Length | 1 mm to 5,000 mm |
| Bracket Thickness | 1 mm to 500 mm |
Frequently Asked Questions
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Decorative Sheet Privacy Screen drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Decorative Sheet Privacy Screen?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Fencing. Tags: privacy-screen, screen, fencing, sheet, design, laser-cut, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
