About this model
Tracked sliding gate with a flat aluminium sheet infill carrying a laser-cut or routed design. Upload your own picture or cut outline, or start from the bundled slot pattern, with a DXF cut file for the sheet. Level top only, with a motor tail. The drawing starts with a full bought hardware set: wheels in trapeze brackets on a formed round ground track, a catch post with a cup catcher, end stops sized to the rail and a wishbone that guides the gate. Switch on the add-ons you need: a Posts View sheet, a gear rack and a motor. Wheel positions can be set one by one.
Type your site sizes and pick the options below. CAD60 rebuilds the Decorative Sheet Tracked Sliding Gate as a 3D solid and redraws every sheet to match.
One of 182 parametric models in the catalogue, each drawn from a true 3D solid.
Front, side, top and isometric views on A4 PDF sheets, each with a title block.
Dimension lines measured off the 3D solid to under a millimetre, never scaled from a template.
The same solid for your CAD or CNC software, ready to nest or quote from.
Change a size and the whole pack regenerates. Millimetres or inches, switch at any time.