Two-Section Fence Run | Fabrication Drawings
Multi-bay fence run with a horizontal cross rail dividing every bay into two independently styled halves. Each half picks its own infill (louvres, slats, battens or left open) and carries its own mid rails, set out on the first bay and repeated in every bay. Level ground.
Configure Two-Section Fence Run dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Total Run Length | 1,200 mm to 30,000 mm |
| Fence Height | 300 mm to 3,000 mm |
| Gap Below Fence | 0 mm to 300 mm |
| Post Spacing | 600 mm to 3,600 mm |
| Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Post Attachment | Concrete into Ground, Bolted to Slab, Footplate |
| Post Concrete Depth | 25 mm to 3,000 mm |
| Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Footplate Width | 50 mm to 500 mm |
| Footplate Depth | 50 mm to 500 mm |
| Footplate Thickness | 6 mm to 25 mm |
| Corner Joint | Mitre, Butt |
| Cross Rail Position | Centred, Set by height |
| Top Section Height | 0 mm to 3,000 mm |
| Batten Orientation | Vertical, Horizontal |
| Slat Orientation | Vertical, Horizontal |
| Infill Style | Louvres, Slats, Battens, Open (no infill) |
| Louvre Orientation | Horizontal, Vertical |
| Blade Overlap / Gap | -50 mm to 200 mm |
| Louvre Angle | 45° (standard), Fit flush to frame, Custom angle |
| Slat Layout | Fixed Gap, Number of Slats |
| Slat Spacing | 3 mm to 200 mm |
| Slat Offset from Edge | 0 mm to 500 mm |
| Batten Layout | Fixed Gap, Number of Battens |
| Batten Spacing | 3 mm to 200 mm |
| Batten Keep-Out | 0 mm to 500 mm |
| Right-Side Keep-Out | 0 mm to 500 mm |
| Mid Rail 1 Orientation | Horizontal, Vertical |
| Mid Rail 1 Position | 0 mm to 10,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical |
| Mid Rail 2 Position | 0 mm to 10,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical |
| Mid Rail 3 Position | 0 mm to 10,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical |
| Mid Rail 4 Position | 0 mm to 10,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
Frequently Asked Questions
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Two-Section Fence Run drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Two-Section Fence Run?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Fencing. Tags: fence-run, fencing, split, louvres, slats, battens, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
