About this model
Tracked sliding gate split by a horizontal cross rail into two independently styled halves. Each half picks its own infill (louvres, slats, battens or left open) and carries its own mid rails, which divide it into bays the infill fills separately. Level or raked (vertical slats or battens, or an open half, on a raked top), with an overlap past the opening, a motor tail and an optional sliding-track top rail. The drawing starts with a full bought hardware set: wheels in trapeze brackets on a formed round ground track, a catch post with a cup catcher, end stops sized to the rail and a wishbone that guides the gate. Switch on the add-ons you need: a Posts View sheet, a gear rack and a motor. Wheel positions can be set one by one.
Type your site sizes and pick the options below. CAD60 rebuilds the Two-Section Tracked Sliding Gate as a 3D solid and redraws every sheet to match.
One of 182 parametric models in the catalogue, each drawn from a true 3D solid.
Front, side, top and isometric views on A4 PDF sheets, each with a title block.
Dimension lines measured off the 3D solid to under a millimetre, never scaled from a template.
The same solid for your CAD or CNC software, ready to nest or quote from.
Change a size and the whole pack regenerates. Millimetres or inches, switch at any time.