Vertical Bar Juliet Balcony | Fabrication Drawings
Draw an accurate custom vertical bar Juliet balcony in minutes. A welded top and bottom rail with plain square or round bars between them, spread to equal gaps no wider than the gap you set, with an optional mid rail. Fix it into the reveal, face-fix it to the wall on standoffs or stand it on posts, with an optional capping or handrail on top. Covers the bar set-out, the wall fixing and the cutting list.
Configure Vertical Bar Juliet Balcony dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 50 mm to 30,000 mm |
| Panel Height | 50 mm to 20,000 mm |
| Gap Below Panel | 0 mm to 20,000 mm |
| Mounting Method | In the reveal, Face fixed on standoffs, On posts |
| Gap to Reveal | 0 mm to 200 mm |
| Overlap Past Opening | 0 mm to 1,000 mm |
| Wall Inset | 0 mm to 15,000 mm |
| Left End Fixing | Fixed to the wall, Fixing tabs, Jamb plate |
| Right End Fixing | Fixed to the wall, Fixing tabs, Jamb plate |
| Tab Type | Flat tab in line with the rail, Vertical plate beside the rail, End plate on the wall |
| Tab Direction | Up, Down, Left up, right down, Left down, right up |
| Tab Length | 1 mm to 15,000 mm |
| Plate Width | 1 mm to 2,500 mm |
| Tab Thickness | 1 mm to 500 mm |
| Tab Position on the Rail | Centred on the rail, Flush with the front face, Flush with the back face |
| Tab Hole Ø | 1 mm to 100 mm |
| Tab Hole End Inset | 0 mm to 1,000 mm |
| Jamb Plate Width | 10 mm to 500 mm |
| Jamb Plate Thickness | 2 mm to 50 mm |
| Jamb Plate Hole Ø | 1 mm to 100 mm |
| Jamb Plate Hole End Offset | 0 mm to 5,000 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Core Drilled, Bolted to Side Wall, Footplate |
| Panel Fixed to Left Post | Not stated, Welded, Brackets (by others) |
| Left Post Concrete Depth | 0 mm to 20,000 mm |
| Left Post Core Hole Depth | 0 mm to 3,000 mm |
| Left Post Core Hole Diameter | 10 mm to 1,000 mm |
| Left Post Footplate Position | Toe left, Toe right, Toe in, Toe out, Centre, Top left, Top right, Bottom left, Bottom right, Top centre (as saved) |
| Left Post Footplate Size | 100 x 100 mm, 150 x 150 mm, 175 x 175 mm, 200 x 200 mm, Other square size, Custom width and depth |
| Left Post Footplate Width | 1 mm to 20,000 mm |
| Left Post Footplate Depth | 1 mm to 20,000 mm |
| Left Post Footplate Plan Size | 20 mm to 1,000 mm |
| Left Post Footplate Thickness | 1 mm to 20,000 mm |
| Left Post Hole Ø | 1 mm to 2,500 mm |
| Left Post Hole Edge Inset | 0 mm to 10,000 mm |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Core Drilled, Bolted to Side Wall, Footplate |
| Panel Fixed to Right Post | Not stated, Welded, Brackets (by others) |
| Right Post Concrete Depth | 0 mm to 20,000 mm |
| Right Post Core Hole Depth | 0 mm to 3,000 mm |
| Right Post Core Hole Diameter | 10 mm to 1,000 mm |
| Right Post Footplate Position | Toe left, Toe right, Toe in, Toe out, Centre, Top left, Top right, Bottom left, Bottom right, Top centre (as saved) |
| Right Post Footplate Size | 100 x 100 mm, 150 x 150 mm, 175 x 175 mm, 200 x 200 mm, Other square size, Custom width and depth |
| Right Post Footplate Width | 1 mm to 20,000 mm |
| Right Post Footplate Depth | 1 mm to 20,000 mm |
| Right Post Footplate Plan Size | 20 mm to 1,000 mm |
| Right Post Footplate Thickness | 1 mm to 20,000 mm |
| Right Post Hole Ø | 1 mm to 2,500 mm |
| Right Post Hole Edge Inset | 0 mm to 10,000 mm |
| Footplate Width | 1 mm to 20,000 mm |
| Footplate Depth | 1 mm to 20,000 mm |
| Footplate Thickness | 1 mm to 20,000 mm |
| Corner Joint | Mitre, Butt |
| Capping Offset | 0 mm to 1,000 mm |
| Largest Gap Between Bars | 1 mm to 5,000 mm |
| Gap At Each End | 0 mm to 10,000 mm |
| Leg Layout | Auto (evenly spaced), Custom (individual legs) |
| Standoff Length | 5 mm to 50,000 mm |
| Standoff Measured From | Back of frame, Front of frame |
| Leg Position on Plate | Centre, Outward, Inward, Top / bottom centre |
| Leg Offset from Top/Bottom | 0 mm to 6,000 mm |
| Leg Offset from Left/Right | 0 mm to 12,500 mm |
| Leg 1 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 1 Position | 0 mm to 25,000 mm |
| Leg 1 Standoff Length | 5 mm to 50,000 mm |
| Leg 2 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 2 Position | 0 mm to 25,000 mm |
| Leg 2 Standoff Length | 5 mm to 50,000 mm |
| Leg 3 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 3 Position | 0 mm to 25,000 mm |
| Leg 3 Standoff Length | 5 mm to 50,000 mm |
| Leg 4 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 4 Position | 0 mm to 25,000 mm |
| Leg 4 Standoff Length | 5 mm to 50,000 mm |
| Leg 5 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 5 Position | 0 mm to 25,000 mm |
| Leg 5 Standoff Length | 5 mm to 50,000 mm |
| Leg 6 Side | Left Side, Right Side, Bottom Rail, Top Rail |
| Leg 6 Position | 0 mm to 25,000 mm |
| Leg 6 Standoff Length | 5 mm to 50,000 mm |
| Wall Plate Width | 10 mm to 2,000 mm |
| Wall Plate Height | 10 mm to 2,000 mm |
| Wall Plate Thickness | 1 mm to 100 mm |
| Wall Plate Hole Ø | 1 mm to 1,000 mm |
| Wall Plate Hole Edge Inset | 0 mm to 1,000 mm |
| Plate B Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate B Width | 10 mm to 2,000 mm |
| Plate B Height | 10 mm to 2,000 mm |
| Plate C Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate C Width | 10 mm to 2,000 mm |
| Plate C Height | 10 mm to 2,000 mm |
| Plate D Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate D Width | 10 mm to 2,000 mm |
| Plate D Height | 10 mm to 2,000 mm |
| Plate E Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate E Width | 10 mm to 2,000 mm |
| Plate E Height | 10 mm to 2,000 mm |
| Plate F Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate F Width | 10 mm to 2,000 mm |
| Plate F Height | 10 mm to 2,000 mm |
| Plate G Leg Position | Centre, Outward, Inward, Top / bottom centre |
| Plate G Width | 10 mm to 2,000 mm |
| Plate G Height | 10 mm to 2,000 mm |
| Material | Aluminium, Galvanised steel, Stainless 304, Stainless 316 |
| Finish | None (mill finish), Powder coat, Anodised, Hot-dip galvanised, Galvanised and powder coat, Satin polish, Mirror polish, Raw (unfinished) |
Frequently Asked Questions
What opening widths does the Vertical Bar Juliet Balcony support?
The Vertical Bar Juliet Balcony accepts opening widths from 50 mm to 30,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Vertical Bar Juliet Balcony drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Vertical Bar Juliet Balcony?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Balustrades. Tags: balustrade, juliet-balcony, bars, wall-mount, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
