Standalone fence panel with a mixed-profile batten pattern. Define 2 to 10 batten types (SHS, RHS, round bar, solid square, or angle) and their per-type counts, spacings, and between-type gaps to produce a repeating decorative pattern. Pattern can run vertically or horizontally across the panel face. Optional posts on either end.
Configure Patterned Battened Fence Panel dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 100 mm to 6,000 mm |
| Panel Height | 100 mm to 4,000 mm |
| Gap Below Panel | 0 mm to 500 mm |
| Wall Inset | 0 mm to 100 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Pattern Orientation | Vertical, Horizontal |
| Number of Batten Types | 2 types, 3 types, 4 types, 5 types, 6 types, 7 types, 8 types, 9 types, 10 types |
| Type 1 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 1 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 1 Width / Diameter | 6 mm to 200 mm |
| Type 1 Depth | 6 mm to 200 mm |
| Type 1 Gauge | 1 mm to 6 mm |
| Type 1 Spacing | 0 mm to 200 mm |
| Type 2 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 2 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 2 Width / Diameter | 6 mm to 200 mm |
| Type 2 Depth | 6 mm to 200 mm |
| Type 2 Gauge | 1 mm to 6 mm |
| Type 2 Spacing | 0 mm to 200 mm |
| Type 3 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 3 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 3 Width / Diameter | 6 mm to 200 mm |
| Type 3 Depth | 6 mm to 200 mm |
| Type 3 Gauge | 1 mm to 6 mm |
| Type 3 Spacing | 0 mm to 200 mm |
| Type 4 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 4 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 4 Width / Diameter | 6 mm to 200 mm |
| Type 4 Depth | 6 mm to 200 mm |
| Type 4 Gauge | 1 mm to 6 mm |
| Type 4 Spacing | 0 mm to 200 mm |
| Type 5 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 5 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 5 Width / Diameter | 6 mm to 200 mm |
| Type 5 Depth | 6 mm to 200 mm |
| Type 5 Gauge | 1 mm to 6 mm |
| Type 5 Spacing | 0 mm to 200 mm |
| Type 6 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 6 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 6 Width / Diameter | 6 mm to 200 mm |
| Type 6 Depth | 6 mm to 200 mm |
| Type 6 Gauge | 1 mm to 6 mm |
| Type 6 Spacing | 0 mm to 200 mm |
| Type 7 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 7 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 7 Width / Diameter | 6 mm to 200 mm |
| Type 7 Depth | 6 mm to 200 mm |
| Type 7 Gauge | 1 mm to 6 mm |
| Type 7 Spacing | 0 mm to 200 mm |
| Type 8 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 8 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 8 Width / Diameter | 6 mm to 200 mm |
| Type 8 Depth | 6 mm to 200 mm |
| Type 8 Gauge | 1 mm to 6 mm |
| Type 8 Spacing | 0 mm to 200 mm |
| Type 9 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 9 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 9 Width / Diameter | 6 mm to 200 mm |
| Type 9 Depth | 6 mm to 200 mm |
| Type 9 Gauge | 1 mm to 6 mm |
| Type 9 Spacing | 0 mm to 200 mm |
| Type 10 Profile | 40 x 40 SHS, 25 x 25 SHS, 50 x 50 SHS, 20 x 20 SHS, 16 x 65 RHS, Ø10 Round Bar, Ø12 Round Bar, Ø16 Round Bar, Ø20 Round Bar, Ø25 Round Bar, 12 x 12 Solid Square, 16 x 16 Solid Square, 40 x 40 Angle, 50 x 50 Angle, 25 x 25 Angle, Other |
| Type 10 Shape | RHS (rectangular hollow), Round bar, Solid square, Angle (folded L) |
| Type 10 Width / Diameter | 6 mm to 200 mm |
| Type 10 Depth | 6 mm to 200 mm |
| Type 10 Gauge | 1 mm to 6 mm |
| Type 10 Spacing | 0 mm to 200 mm |
| Gap Type 1 → Type 2 | 0 mm to 300 mm |
| Gap Type 2 → Type 3 | 0 mm to 300 mm |
| Gap Type 3 → Type 4 | 0 mm to 300 mm |
| Gap Type 4 → Type 5 | 0 mm to 300 mm |
| Gap Type 5 → Type 6 | 0 mm to 300 mm |
| Gap Type 6 → Type 7 | 0 mm to 300 mm |
| Gap Type 7 → Type 8 | 0 mm to 300 mm |
| Gap Type 8 → Type 9 | 0 mm to 300 mm |
| Gap Type 9 → Type 10 | 0 mm to 300 mm |
| Gap Between Repeats | 0 mm to 300 mm |
| Pattern Fit | Natural (centred), Flush (scale gaps), Fixed left offset, Auto-repeat (flush) |
| Left Edge Offset | 0 mm to 500 mm |
| Batten Overhang Top | 0 mm to 500 mm |
| Batten Overhang Bottom | 0 mm to 500 mm |
The Patterned Battened Fence Panel accepts opening widths from 100 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Yes, on the Fabricator and Fleet tiers. Saved jobs store every input you entered and reload the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions. The free Explorer tier doesn't persist jobs, but you can still copy your inputs out manually.
Category: Fencing. Tags: fence-panel, fencing, battens, patterned, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and galvanised steel.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.