Parametric pedestrian gate with a rectangular hollow-tube frame and evenly-distributed slats. Supports vertical or horizontal slat orientation, optional posts, optional lockbox, optional frame radius, and raked ground.
Configure Slatted Pedestrian Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
| Parameter | Range |
|---|---|
| Clear Opening Width | 600 mm to 6,000 mm |
| Clear Opening Height | 600 mm to 3,000 mm |
| Gap Below Gate | 10 mm to 300 mm |
| Frame Extrusion Profile | 40 x 40 SHS, 50 x 50 SHS, 25 x 25 SHS, Other |
| Frame Tube Width | 25 mm to 200 mm |
| Frame Tube Depth | 25 mm to 200 mm |
| Frame Gauge | 1.2 mm to 6 mm |
| Slat Size | 65 x 16 Extrusion, 25 x 25 SHS, Other |
| Slat Width | 10 mm to 200 mm |
| Slat Depth | 10 mm to 200 mm |
| Slat Distribution | Fixed Gap, Number of Slats |
| Slat Spacing | 3 mm to 200 mm |
| Slat Offset from Edge | 0 mm to 500 mm |
| Slat Orientation | Vertical, Horizontal |
| Post Extrusion Size | 50 x 50 SHS, 65 x 65 SHS, Other |
| Post Width | 30 mm to 200 mm |
| Post Depth | 30 mm to 200 mm |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Hinge Tolerance | 5 mm to 50 mm |
| Latch Tolerance | 5 mm to 50 mm |
| Lock Type | No Lock/Handle, Lever Handle Lock, Ball Handle Lock, Mortice Lock, Lokklatch, Other |
| Lockbox Width | 40 mm to 300 mm |
| Lockbox Height | 80 mm to 400 mm |
| Lockbox Height from Ground | 500 mm to 1,600 mm |
The Slatted Pedestrian Gate accepts opening widths from 600 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
Heights range from 600 mm to 3,000 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
Category: Gates. Tags: gate, pedestrian, slats, fabrication. Built with CadQuery, the same OCCT geometry kernel used in FreeCAD and professional CAD tools.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.