Spear-Top Pedestrian Gate | Fabrication Drawings
Parametric pedestrian gate with vertical spears (25x25mm SHS shafts) topped with a choice of tips (crimped, arrowhead, pressed point, ball, finial, fleur-de-lis or fishtail) with optional puppy-picket heights and rings or a band. Heritage palisade aesthetic. Spears typically pass through the top rail and overhang it by ~100mm, decorative tip included.
Configure Spear-Top Pedestrian Gate dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Clear Opening Width | 600 mm to 6,000 mm |
| Clear Opening Height | 600 mm to 3,000 mm |
| Gap Below Gate | 0 mm to 500 mm |
| Corner Joint | Mitre, Butt |
| Mid Rail 1 Orientation | Horizontal, Vertical |
| Mid Rail 1 Position | 0 mm to 10,000 mm |
| Mid Rail 1 Recess | 0 mm to 500 mm |
| Mid Rail 2 Orientation | Horizontal, Vertical |
| Mid Rail 2 Position | 0 mm to 10,000 mm |
| Mid Rail 2 Recess | 0 mm to 500 mm |
| Mid Rail 3 Orientation | Horizontal, Vertical |
| Mid Rail 3 Position | 0 mm to 10,000 mm |
| Mid Rail 3 Recess | 0 mm to 500 mm |
| Mid Rail 4 Orientation | Horizontal, Vertical |
| Mid Rail 4 Position | 0 mm to 10,000 mm |
| Mid Rail 4 Recess | 0 mm to 500 mm |
| Mid Rail 5 Orientation | Horizontal, Vertical |
| Mid Rail 5 Position | 0 mm to 10,000 mm |
| Mid Rail 5 Recess | 0 mm to 500 mm |
| Mid Rail 6 Orientation | Horizontal, Vertical |
| Mid Rail 6 Position | 0 mm to 10,000 mm |
| Mid Rail 6 Recess | 0 mm to 500 mm |
| Spear Distribution | Fixed Gap, Number of Spears |
| Gap Between Spears | 0 mm to 500 mm |
| Offset From Each Stile | 0 mm to 2,000 mm |
| Spear Top Treatment | Through Top Rail (protrudes above), Flush with Top Rail |
| Spear Top Protrusion | 0 mm to 500 mm |
| Spear Bottom Treatment | Through Bottom Rail (protrudes below), Flush with Bottom Rail, Cut Into Bottom Rail (sits on top) |
| Spear Bottom Protrusion | 0 mm to 500 mm |
| Spear Mounting | Face-Fixed (front of frame), Pierce Frame (centred through rails) |
| Tip Style | Crimped Pyramid, Cast Arrowhead, Pressed Point, Ball Top, Ball Finial, Fleur-de-Lis, Fishtail, Plain Cut End |
| Tip Height (Inside Protrusion) | 0 mm to 300 mm |
| Ball Diameter | 16 mm to 80 mm |
| Finial Collar Height | 0 mm to 40 mm |
| Fleur-de-Lis Width | 30 mm to 120 mm |
| Cap Plate Thickness | 0 mm to 12 mm |
| Arrowhead Base Width | 12 mm to 100 mm |
| Arrowhead Base Depth | 12 mm to 100 mm |
| Arrowhead Collar Height | 0 mm to 50 mm |
| Arrowhead Collar Overhang | 0 mm to 20 mm |
| Pressed Point Width | 12 mm to 120 mm |
| Pressed Point Thickness | 4 mm to 60 mm |
| Pressed Point Shoulder | 0 mm to 100 mm |
| Spear Height Pattern | All Same Height, Alternating, Puppy Pickets |
| Short Spear Protrusion | 0 mm to 500 mm |
| Short Spear Tip | Same as Tall Spears, Plain Cut End |
| Rings and Bands | None, Rings Between Spears, Second Rail Band |
| Ring Outer Diameter | 20 mm to 200 mm |
| Ring Bar Diameter | 4 mm to 20 mm |
| Ring Height Above Top Rail | 0 mm to 600 mm |
| Band Bar Size | 10 mm to 40 mm |
| Band Height Above Top Rail | 20 mm to 600 mm |
| Rail Hole Clearance | 0 mm to 3 mm |
| Left Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Left Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Left Post Concrete Depth | 50 mm to 1,500 mm |
| Left Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Right Post Material | Steel (galvanised), Aluminium, Stainless steel (304/316) |
| Right Post Attachment | Concrete into Ground, Bolted to Side Wall, Footplate |
| Right Post Concrete Depth | 50 mm to 1,500 mm |
| Right Post Footplate Position | Toe In, Toe Out, Centre, Top Left, Top Centre, Top Right |
| Footplate Width | 50 mm to 500 mm |
| Footplate Depth | 50 mm to 500 mm |
| Footplate Thickness | 6 mm to 25 mm |
| Left Post Hole Ø | 2 mm to 50 mm |
| Left Post Hole Edge Inset | 0 mm to 200 mm |
| Right Post Hole Ø | 2 mm to 50 mm |
| Right Post Hole Edge Inset | 0 mm to 200 mm |
| Left Post Footplate Width | 50 mm to 500 mm |
| Left Post Footplate Depth | 50 mm to 500 mm |
| Left Post Footplate Thickness | 6 mm to 25 mm |
| Right Post Footplate Width | 50 mm to 500 mm |
| Right Post Footplate Depth | 50 mm to 500 mm |
| Right Post Footplate Thickness | 6 mm to 25 mm |
| Hinge Tolerance | 5 mm to 50 mm |
| Latch Tolerance | 5 mm to 50 mm |
| Lock Type | No Lock/Handle, Lever Handle Lock, Ball Handle Lock, Mortice Lock, Lokklatch, Other |
| Lockbox Width | 40 mm to 300 mm |
| Lockbox Height | 80 mm to 400 mm |
| Lockbox Height from Ground | 500 mm to 1,600 mm |
| Hinge Type | Not shown, Weld-on butt hinge, Bolt-on plate hinge, Pivot bearing (top and bottom) |
| Bearing Unit | Custom (enter sizes below), UCP207 pillow block (2 bolt, 35 mm bore), UCF207 square flange (4 bolt, 35 mm bore) |
| Hinge Positions | Near the ends, Evenly spaced, Custom heights |
| Hinge 1 Height | 0 mm to 4,000 mm |
| Hinge 2 Height | 0 mm to 4,000 mm |
| Hinge 3 Height | 0 mm to 4,000 mm |
| Hinge 4 Height | 0 mm to 4,000 mm |
| Hinge Plate Width | 30 mm to 300 mm |
| Hinge Plate Depth | 30 mm to 300 mm |
| Hinge Plate Thickness | 3 mm to 80 mm |
| Hinge Bolt Hole Diameter | 4 mm to 40 mm |
| Hinge Bolt Inset | 0 mm to 100 mm |
| Bearing Boss Diameter | 10 mm to 200 mm |
| Bearing Pin Diameter | 6 mm to 120 mm |
| Bearing Pin Length | 10 mm to 200 mm |
| Hinge Plate Offset | 0 mm to 100 mm |
| Weld Plate To | Latch Stile (gate), Latch Post (frame) |
| Catch Plate Face | Back (property side), Front (street side) |
| Catch Plate Position | Top of gate, Bottom of gate, Custom height |
| Height from Ground | 100 mm to 2,400 mm |
| Plate Width | 30 mm to 200 mm |
| Plate Height | 30 mm to 200 mm |
| Plate Thickness | 3 mm to 12 mm |
Frequently Asked Questions
What opening widths does the Spear-Top Pedestrian Gate support?
The Spear-Top Pedestrian Gate accepts opening widths from 600 mm to 6,000 mm. Enter your exact site measurement and the engine recomputes all frame members, battens or slats, and dimension lines to match.
What heights can the Spear-Top Pedestrian Gate be?
Heights range from 600 mm to 3,000 mm. Left and right heights can differ to accommodate raked or sloped ground. The drawing recomputes automatically for any height within the range.
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Spear-Top Pedestrian Gate drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Spear-Top Pedestrian Gate?
Yes. The free Explorer tier keeps 1 saved drawing, so you always have somewhere to land between visits. Fabricator saves every drawing you make and reloads the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions.
References & technology
Category: Gates. Tags: gate, pedestrian, spear, palisade, security, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and aluminium.
