Stair Handrail | Fabrication Drawings
Sloped round or oval tube handrail on plumb stanchions, following a stair pitch. Stanchions stay vertical while the handrail follows the rake. Specify pitch via rise/going per tread or by angle, and choose floor-mounted stanchions or wall brackets.
Configure Stair Handrail dimensions and download professional A4 PDF fabrication drawings with orthographic views and dimension lines. No CAD software needed. Sub-millimetre precision from a true 3D solid model.
Key facts
Specifications
| Parameter | Range |
|---|---|
| Pitch Input Method | Rise & Going, Angle (degrees) |
| Rise per Tread | 80 mm to 350 mm |
| Going per Tread | 150 mm to 500 mm |
| Total Run | 300 mm to 12,000 mm |
| Height Above Nosing | 865 mm to 1,100 mm |
| Mount Mode | Floor Stanchions, Wall Brackets |
| Max Support Spacing | 600 mm to 1,800 mm |
| Stanchion Attachment | Footplate, Core Drilled, Bolted |
| Core Drill Extension Below | 50 mm to 600 mm |
| Footplate Position | Centre, Toe In, Toe Out |
| Footplate Width | 50 mm to 300 mm |
| Footplate Depth | 50 mm to 300 mm |
| Footplate Thickness | 4 mm to 25 mm |
| Bracket Arm Section | 12 mm to 40 mm |
| Bracket Projection | 60 mm to 250 mm |
| Bracket Plate Width | 30 mm to 150 mm |
| Bracket Plate Height | 30 mm to 150 mm |
| Bracket Plate Thickness | 3 mm to 16 mm |
Frequently Asked Questions
What do I get in the drawing pack?
Each drawing pack is an A4 PDF with orthographic views (front elevation, side elevation, top view, and isometric), full dimension lines, extension lines, and a professional title block. You also get a live 3D preview in the browser and optional STEP file export for CAD software.
Can I use this drawing for fabrication?
Yes. Dimensions are computed to sub-millimetre precision from a true 3D solid model, not approximated from a template. Print the PDF at actual size, hand it to your fabricator, and build from it. Change any input and the entire drawing regenerates in about 60 seconds.
How long does it take to generate a Stair Handrail drawing?
Around 60 seconds end-to-end. Geometry computation runs server-side in a CadQuery process with a 30-second per-request timeout; PDF rendering and download account for the rest. If you change a dimension, regeneration takes the same ~60 seconds — there is no manual redrafting step.
Can I save and reload my dimensions for the Stair Handrail?
Yes, on the Fabricator and Fleet tiers. Saved jobs store every input you entered and reload the configurator in one click, so you can revise a quote, regenerate a clean PDF, or branch a design for a similar customer without re-typing dimensions. The free Explorer tier doesn't persist jobs, but you can still copy your inputs out manually.
References & technology
Category: Balustrades. Tags: balustrade, railing, stair, handrail, fabrication. Geometry built with CadQuery on the OCCT (OpenCascade Technology) kernel — the same geometry foundation used in FreeCAD and a number of commercial CAD packages. Drawings are orthographic projections of the computed 3D solid; no view is sketched or scaled from a template.
Related terminology in the CAD60 fabrication glossary: see orthographic view, dimension line, title block, RHS, and galvanised steel.
No preview yet
Configure your parameters and click Generate Drawing to see fabrication drawings here.