About this model
Cantilever sliding gate with vertical battens face-fixed to the gate body. No track across the opening: roller carriages on posts beside the opening run inside a down-facing channel welded under the bottom rail, and a braced counterbalance tail, half the clear opening by default, extends past the gate body. The battens fill the body only and stop at the bottom rail, because the channel sits underneath it. The drawing starts as the gate alone. Switch on the add-ons you need: roller carriages at real size, roller posts, a catch post, a Posts View sheet, a Hardware Details sheet, a gear rack and a motor.
Type your site sizes and pick the options below. CAD60 rebuilds the Battened Cantilever Sliding Gate as a 3D solid and redraws every sheet to match.
One of 181 parametric models in the catalogue, each drawn from a true 3D solid.
Front, side, top and isometric views on A4 PDF sheets, each with a title block.
Dimension lines measured off the 3D solid to under a millimetre, never scaled from a template.
The same solid for your CAD or CNC software, ready to nest or quote from.
Change a size and the whole pack regenerates. Millimetres or inches, switch at any time.